Origami Syricen: how to make paper with an intelligible and intelligible description for beginner needlewomen. How to make a clean paper? Four-pointed throwing star

East is famous, as a rule, not only the technique of paper addition, but also eastern martial arts. The combination of these two types of art has been reflected in paper figures of combat guns. A bright example of such a collaboration is Syricen. This is a Japanese throwing weapon, which is small blades made in the form of asterisks or coins.

Today I want to show you how to make a clean paper.

This model will be particularly interesting for children's creativity with boys who are fond of toy weapons. In addition, the implementation of such a figure does not require great knowledge in paper art. We will try to make several types of origami Syricen, the video of a simple way of assembling will be quite clearly for repetition:

Addition of such paper figures are quite popular not only in the East.

Syricen Origami do it yourself

The admirers of Japanese culture from all over the world are trying to adapt all sorts of materials to their language. Russia is no exception. I offer you a visual scheme in Russian, following which will help you make a simple 4-finite Syricen:

Avoidal origamists try to bring new ideas to the ancient Japanese art of folding paper. In this regard, there is far from one scheme origami Syrichen. Japanese creativity, as you know, does not know the borders at all. There are quite complex figures of Syricen, to repeat which it can leave a lot of time.

I will introduce you to the most common models.

Octagonal throwing star

If, when adding 4-coal surroundings, there was no problem, then I propose to try my strength and fold the 8-end suichen.

By the way, such a weapon is also called "Syricen Transformer". Initially folded according to this scheme, the figure is not much like a Japanese combat weapon. But by neat presses on different sides of the figure, the model begins to take out the outlines of Syricen. In my opinion, this paper handicraft will be very interesting for children. Try to first fold it yourself, and then show this way to the child, thereby training attention and memory.

Throwing star from naruto

Today, the cartoons shot in the anime genre are particularly popular. The most popular anime-shield is the Japanese comic about the restless teen ninja naruto. Fans from all over the world are trying to copy the suit of his beloved character and his ammunition. And Syricen is no exception. The main character of this comic masterfully owns this kind of Japanese weapon. Therefore, it is not a secret, why this species of origami became so popular.

Syricen naruto black:

To recreate this weapon from paper, it is enough to use black paper to work. The scheme of a simple 4 coal surround is given above, and its execution will not cause great difficulties.

So, if your child is very passionate about the Japanese culture, then you can please it with such simple crafts. Perhaps later he will seriously be interested in the art of origami, and it will become his hobby.

Do not be afraid to try new and show fantasy. Perhaps you can come up with your original scheme for creating a paper sculpture.

Video lessons for teapots

Many boys love to do such a throwing weapon like a cleric of paper. It can be used in games and entertainment. Such four-pointed stars are origami, which is quite easy to make with their own hands.

To create such a throwing weapon, do not need complex drawings or pattern, sufficiently clever fingers and sheet of paper. If you do not want the fight on such surrogue to be ended with membership, or even the death - do not use in the manufacture of iron, the maximum of which you can make this throwinglet is from cardboard. This is not the sword of Cladiets. And folding it from the paper will help the schemes with a description and pictures that will clearly demonstrate how it is necessary to bend and fold the sheet of paper to get a surround, not a machine gun. And what does Surikren look like in the original - it will help to present a photo or drawing on the Internet.

Many boys love to do such a throwing weapon like a cleric

To create ninja surrounds, it is necessary to create a transforming blank. In this case, a diagram will be described that will help create an 8-end star.

1. You need to prepare paper. On each module you need your paper sheet. It is best to make such work using paper of different colors.
2. The sheet bends diagonally. Then he bends reused.
3. The left lower edge should be beaten into the center of the paper.
4. Then the right upper angle also consists in the center of the sheet.
5. The upper paper layer bends on top.
6. The billet turns over. The triangle at the top must be lowered down by pulling its top corner.
7. The corner formed at the bottom is bent in the middle. This is the final stage to create a billet-transformer.
8. Now you need to repeat the above actions to make another 7 of the same billets.
9. You can start assembling Syricen. To do this, one workpiece turns out the right angle of the triangle. In the educated "pocket" you need to bother the left corner of another workpiece. So you need to continue to the end.

8-end suichen looks very beautiful, especially if it is multicolored. They can decorate the interior.

Gallery: Syricen of paper (25 photos)

Flying clericen paper (video)

4-end suichen paper with your own hands: scheme

A boy who wants to represent that he is a samurai or ninja, must necessarily make such a cradle.

Master Class:

1. You need to take a square of a square form. You can pull the paper sheet and make it square.
2. Then this leaf is allowed in half. Get 2 rectangles. Alternatively, you can use paper 2 different colors, so the craft is much more beautiful.
3. After that, each rectangle is folded in half down length. There should be 2 new rectangles, but more subtle.
4. Now you need to fold the corners of the figures. One corner bends up, and the second is down.
5. Now the rectangle must be folded along the lines. They were symmetrically laid a triangle earlier.
6. At this stage should be checked symmetry. Two figures add up nearby. If some of them are more or less, you need to remake the workpiece. Right Syricen can only be done if both parts are equal.
7. To connect the parts, the right figure turns over and is gently attached to the left figure.
8. Modules are attached for "pockets" that is formed by the lower triangle.

A boy who wants to imagine that he is a samurai or ninja must necessarily make such a craft

At the last stage, the assembly needs to bendled the edges of the fastened figures.

Syricen of paper: The simplest scheme in the Origami technique

This fun lesson will fit perfectly in order to take children. In addition, the scheme of work is as simple as possible.

1. At the first stage of work from paper leaves, you need to make a square. To do this, one edge of rectangular paper should be beatened to the opposite edge. A piece of sheet that remains downstairs should be cut.
2. The square diagonal is folded. In order to do this, you need the upper right corner to break diagonally. Excess paper is cut.
3. Now the preparation of details begins. Squares fold in half. Rectangular figures were formed.
4. The figures obtained are cut with scissors in length. Instead of a knife, you can use a special paper knife, work easier to work.
5. Now every piece of paper is important to bend down in length. It is necessary to align the edge of the figures by reducing the angles of diagonally. At the same time, one corner of the shape bends down, and the other is up.
6. Now the figures must be compared. They must be a mirror reflection of each other. If the figures are not equal, it is recommended to remake one of two blanks. Otherwise, the correct Syricen will not work.
7. Now each figure needs to form a triangular fold. For this, the upper edge is bent diagonally.
8. At this stage, you can start assembling Syricen. One figurine turns over to the other side. One detail plays perpendicular to another. So the connection must occur.
9. The upper angle of the lower part is folded into the previously formed "pockets". At the bottom angle, a similar action is performed.
10. Now the design needs to be carefully flipped over the front side to the needlework.
11. It is necessary to continue to turn all the corners.
12. Then the final fold is made.

In order for the caretaker to serve as long as possible, it is recommended to overtake it with scotch. This will prevent its scattering.

What tools and materials need to be prepared?

Work on Syricen is work with paper. This type of creativity, like any other, requires the materials preparation masters.

Work on Syricen is work with paper

In this case, such materials will be needed:

• Paper sheet. It may be an ordinary A4 format printer paper or colored paper. An ideal option for creating Syricen would be to use special paper for origami. You can find it in stationery stores.
• Scissors either paper knife.
• Scotch. It is not necessary to use it, but Surikren will last much longer with him.

Warnings for newbies

In such painstaking work, as in any other, it is important to take precautions in a timely manner.

Here are some rules that should be observed:

• The ends of Syricen are sharp enough, especially if he is wrapped in scotch. That is why it is not recommended to leave this craft near young children.
• At the time of the shuriken throw, it is important to keep care. There were cases when people wounded themselves.
• No need to throw it into anyone. Syricen may hurt a person or animal. It is especially not worth throwing a star into the eyes, as its ends are very sharp.
• When working with scissors, it is important to be careful.
• You can cut the paper strongly, so you do not need to spend your hands and fingers for its edge.

In such painstaking work, as in any other, it is important to take precautions in a timely manner.

• To fragilely collect details in Syricen, you need to make all the folds very carefully.
• After the collection of the star was completed, it is important to rush all the sequels made earlier. It will also facilitate work at the final stage.
• To make good bends, you need to wash their nail. But it should not be pressed too much, otherwise the paper can break.
• So that the stars looked good, it is important to pre-check the symmetry of the details. If they are not symmetrical, then the smoke will not fly.
• All bends need to be aligned when switching to the next step of work.
• If you use a magazine paper, then Syricen will get as correct as possible.
• This cracker can be used as a decoration for a glass with a cocktail. To do this, it is enough to stick to the center of the stars a small stick or toothpick.

In this article you will learn how to make the four-sided origami shuriken from paper with your own hands.

Origami Syricen of Paper

For the manufacture of paper shuriken, we need two dense multicolored square paper sheets.

The scheme below will be useful for beginners.

How to make origami shuriken scheme

To begin with, you must fold each sheet twice in order to mark the middle of the sheet, and then also folded every half on the sides of the middle line so that the edges of the paper are opposite the line and relate to each other.

• Then fold the obtained billets in half, the angles are lowered, as shown in the diagram. Once again we turn the paper in accordance with the image so that the edge of the paper concerned the edge of the previously wrapped corner.
• We do so on each side, the symmetric triangles should turn out.
• We have two figures that should look at the opposite sides if you put on the table.

One half put the triangles down, the other is top, but the triangles up. We clamp the corners of the lower module under the central edges of the upper figure, we bring them under the plane of triangles.

I turn over the product and in the same way along the fold line, we tailble the corners and refuel into paper pockets.

Origami Syricins Video

So we made a paper copy of Syricen with your own hands. If something seems incomprehensible in the diagram, see the video. In this detailed instruction, each step of making this decorative product is explained, which can be stuck in the air.

Article - origami genre

We continue to publish the schemes of original homemade origami and today we want to tell how to make Syricen Origami.

Syricen is a dangerous and deadly weapon of Japanese warriors of the night - Ninja. However, making it out of paper, you can play the most favorite game of all boys - to ride from flying "bullets", that is, Syricenov.

In addition, if nobody wants to throw into each other in each other, you can arrange competitions in throwing paper suclosses to accuracy on toy figures or soldiers.

Mastery Syricen Origami Paper

In order to make a paper throwing suichen (see also ) You will need two square sheet of paper. Paper can use different colors, it will make your shuriken original and beautiful.

If you do not have square sheets of paper, and for example, there are only A-4 sheets of format, make the following manipulations as shown in the photo below.

Fold two rectangular sheets diagonally

Cut the extra edge of the paper

Two square sheets from the rectangular sheets

Fold square sheets in half

Fold half the sheet again in half

• If the photo is not parsing above, see Figure 1.

  

  Fig.1 Cutting the edge of the sheet

• Take the billet bending again, as in Figure 2.

  

  Fig.2 Make another bend

  

  Bend the edges of the blanks diagonally as shown by arrows

• The same option flexing the corners of the paper strip, in Figure 3.

  

  Fig.3 Bending edges of the workpiece

  

  Bend corners in the following directions.

• And we also continue to flex a strip of paper, as in Figure 4.

  

  Fig.4 Once again, bending the edges of the workpiece

• We do the same actions with another sheet of paper, however, the angles need to be bended in the other side, Figure 5.

  

  Fig.5 In the second billet corners bend in the other side

• When the blanks are ready, place them, as in Figure 6.

  

  Fig.6 Place the workpiece vertically and horizontally

• We begin to connect strips, to do this insert the right and left corners of the horizontal blank in the pockets of the vertical (Figure 7).

  

  Fig.7 Connect the billets

• I turn over the workpiece.

  

• It remains inserting the remaining corners into the free pockets.

  

Syricen - Japanese throwing weapon used by ninja. It is a small star with sharp angles. Children can observe the use of this weapon in favorite cartoons, they armed Batman, Naruto, Rafa, as well as Heroes Anime.

To imitate the favorite heroes, the boys make this weapon with their own hands from the designer, paper or other primary materials. But it is possible to make origami from the "Syricen" paper, and the caretaker will also fly well as real weapons, but at the same time harm does not apply the enemy.

Not every parent imagines what Syricen is. In Japan, many types of throwing weapons were invented, among which small stars occupied a special place. They were made of metal. There were two types of such weapons:

• small peaks with edge at the end;
• four-pointed stars, every angle of which was a sharp sharpened blade.

It is believed that they gave one of Ninja schools an advantage over rivals. Now this throwing weapon is sold in some stores in Japan and Europe, stored in collections. A variety of hieroglyphs and mystical signs were often applied to their blades, which, according to the Japanese, brought good luck to their owners. Today, such signs are syrupted from ancient weapons, but apply only for collectible specimens.

Despite the fact that stars for throwing often played a decisive role in battles, they were not used as the main weapons that were katana and spears Yari. Syricians were only an addition to the equipment that played an important tactical role.

What will required for the manufacture of the model?

If you need to urgently do Syricen, then prepare several rectangular sheets. To make the similarity of Syrichen Naruto, you will need black sheets. In the manufacture of crafts, complementing the ninja costume, take the paper that coincides with the gloves or the robe itself.

Since we offer for the manufacture of crafts to use Origami techniques, then you do not need anything other than a few dense paper sheets. Modules are attached one to another with the help of paper valves.

For the manufacture of crafts will take no more than 10 minutes, which, if necessary, will allow you to quickly create new specimens.

Syricen translates as a blade in his hand, so make small models. The smaller the size will be, the hardest and more realistic work.

Four-pointed throwing star

There are several schemes manufacturing schemes. All of them are based on one principle, which is used for the addition of a four-pointed star. This basic model is suitable for beginners. Traditionally, the origami take square sheets. The manufacture of one model takes two squares.

In more detail, how to make origami from Paper Suriken, tells the phased instruction:

1. Bend the two opposite edges of each square to the center. The remaining items also repeat for each part.
2. Fold the resulting rectangle in half.
3. Bend diametrically located corners. On the second rectangle, make a fold on other corners so that you have a detail, which is a mirror copy of the first.
4. Billet Bend the painter on both sides. You received two halves with corners directed in different directions.
5. Fold the workpiece one on another perpendicular to you have the ability to connect corners with gaps.
6. Insert the corners into the gaps first on the one hand, and then on the other. Rate the end result.

You got a paper sucliner, which can be made of contrasting paper shades so that it is even more attractive. This is a carriage-transformer, which is used for the manufacture of others, for example, can be turned into a spinner or a bright turntable for decorating a festive table.

Children are very inventive: from four-spin surrounds, they came up with a more complex weapon - a bunch of stars. It looks impressive, has a large size due to the use of 4 to 8 standard surrogues. Such models most often use the most avid origami lovers who understood the essence of this art, learned to modernize the basic models to their needs.

Eight-pointed complex design

One of the models that was obtained by finalizing the basic modules is an eight-pointed throwing star. It is called transforming. In appearance, it is little similar to Japanese throwing weapons, but still loved by children. Many boys believe that an asterisk with eight sharp angles "more dangerous" is standard, so they often make this model for games.

There are several options for adding such a craft. They will only be asset by one who owns the art of origami. We give step-by-step instructions to one way.

Make 8 modules from the same square billets:

1. Put a sheet an angle to yourself. If you have taken colored paper, then it should be placed on the white side. You should not take a double-sided version, since the unpainted part will help you during the construction of the design.
2. Fold it diagonally and deploy.
3. Bottom corners lift the line in the middle of the sheet to the intended line.
4. Bend down the upper sharp corner.
5. Also bend the lower angle.
6. If you are done correctly, then the tip will be on the same level with the tip of the valve collected earlier.
7. Fold the module vertically in half.
8. Make 7 more items to collect a circle of modules.

The model is very simple: the lower left corners of each module must be placed in the white pockets of the other.

According to this scheme, collect the whole eight-pointed star. After the circle comes, it will be origami from the paper "Syricen eight-pin".

The described elements can be used to create other crafts, it is important only to apply fantasy and understand the basics of fixing them without using glue.

How to throw Syricen?

From the paper it turns out a type of Japanese weapon of Hira-Syrichen. It can be thrown from different positions, having horizontally or vertically to the target. For a throw, the craft is clamped between the fingers of one hand, and then make a throwing movement with a brush, pushing the figure.

During the flight, the figure should rotate around its axis by 360 degrees.

Japanese Ninja threw snicks so that they pierced chlipping fences and stuck in the tree. Pre-ban the child to throw crafts in animals and people. Make him a goal similar to that used in darts. Even paper can be caused by a strong pain if you get to the eye or solar plexus. Make a toy in the target is even more useful, this occupation will develop a brush and an eye.

Conclusion

Make a shuriken from the girlfriend is easy. They are cut out of cardboard, fold from the designer, but a more gentle toy will be paper. The art of origami, like this throwing weapon, came from the east. Therefore, it is very symbolic to use it for the manufacture of Syricen models.

You do not have to spend money on materials for crafts, which will allow you to not worry if the child will lose it on a walk. It is important that no more than 10 minutes will come to the manufacture of replacement.

Alexandra is a regular expert of Pupsfull portal. She writes articles about games, pregnancy, upbringing and training, child care and mother health.