Mini thread hat for a New Year tree: master class. A hat made of threads for a Christmas tree without knitting skills: a detailed master class on how to make small hats from threads

Hello, dear readers! As the New Year holidays approach, many begin to think about home decor, in particular decorating the Christmas tree. Earlier we already told you how to make a wide variety of decorations for the green spiky beauty, but today we will tell you how to make a hat from threads for a Christmas tree. At first glance, this element seems to be knitted, but in fact, everything is far from it! All the secrets of creating such an incredibly cute cap pendant will be revealed later in the review.

This is the kind of hat we will end up with.

Thread hat: master class.

To work you will need:

1. A roll of paper towels or toilet paper.
2. Scissors and stationery knife.
3. Threads (floss or yarn).

Stages of creating a hat.

We take a paper towel roll (we used a foil roll) and use a utility knife to cut it into rings 8-10 mm wide. Accordingly, how many hats you want to get in the end, so many rings should be prepared.

We cut the threads into pieces 15 cm long. It’s difficult to predict their total number at this stage, so don’t cut too much; if there’s not enough, you’ll cut more.

Take the first thread and fold it in half.

In this folded form, we pass the thread through the ring from the sleeve.

Then we thread the two free ends through the loop.

Tighten the thread.

We create a similar loop nearby and also tighten the thread. We move this thread tightly to the previous one.

According to the above scheme, we cover the entire ring with loops of thread.

This is what you should get:

And you pass them all together through the ring, as if turning them inside out.

Align all the threads with your fingers - place them in a column up.

We cut a thread about 15 cm long, fold it in half, and wrap it around all the upper threads, stepping back from the edge a little more than 1 cm (adjust as you wish). Tighten the loop, draw the loose ends around, and tie it into a knot. We cut off the excess threads with scissors.

We lay the hat on the table, smooth out the protruding ends, and cut it in a semicircle. If the pompom seems long, cut it some more.

Below the pompom we tie a string to the pendant.

And here is the result!

A hat made of threads on a Christmas tree will look simply magical; your guests will not even guess that this product is not knitted at all! Such cute little things make New Year's decor more cozy, warm and homey! Be sure to make such wonderful mini-hats, you will be very pleased with the result.

You can always make wonderful New Year's toys with your own hands. For example, a beautiful toy for the New Year tree in the form of a hat made of threads.

With the arrival of winter, you should stock up on interesting homemade crafts, because preparations for the main holiday - the New Year - begin. That's why we decided to make creative thread hats for you. They can be used as decorations on a Christmas tree, on a bottle of champagne, or simply put on a little snowman, which you can also make with your own hands. It will also be a wonderful souvenir for family and friends!

All we need is:

• Knitting thread
• Scissors
• Cardboard

First, choose the size of your hat. For small hats, a 15 cm strip of cardboard, approximately 2-3 cm wide, is suitable. I made them small, taking a 10 cm strip of cardboard. Then glue the edges of the strip together, making a circle.

Choose yarn of your favorite color and make blanks 20-25 cm long. Fold the thread in half and place a loop inside our circle. Then wrap the tails of the thread into a loop and tighten.

Do this with each thread until the cardboard is completely closed. Then turn the ponytails inward and secure with a thread. The hat is ready! To make it more beautiful, decorate it with rhinestones or buttons.

Good luck in your creativity and a bright New Year's mood!

And we continue active preparations for the upcoming favorite holiday, the New Year! And this time we bring to your attention an original version of a New Year's tree toy in the form of a winter hat.

Making such Christmas tree decorations with your own hands is very simple, and besides, you don’t need any supernatural materials to make them.

Thread hat

DIY Christmas tree toy Hat

To create a New Year's toy, Thread Hat, you will need the following materials: brightly colored knitting threads, a cardboard toilet paper roll, scissors.

Cut a piece about 2 cm wide from the cardboard tube. Now cut the threads into pieces of about 16 cm and start tying them on a cardboard strip (see photo). The more pieces of thread you tie, the more voluminous and neat the Christmas tree toy will look.

You can use threads of the same color or opposite threads of different colors and textures, thereby creating different patterns.

Now gather all the threads together and thread them inside, as if turning them inside out. Tie the threads at the top so that there are threads left to create a fluffy pompom.

Place a little cotton wool or a piece of padding polyester inside the hat so that the hat holds its shape.

Use scissors to trim the pompom.

Now tie a loop to the finished hat and hang it on the Christmas tree.

These thread hats can be used to decorate not only the New Year tree, but also greeting cards, gifts, clothes and accessories.

You can also make a hat without a pompom. To do this, tie the threads before turning the cap inside out.

As an option, a miniature hat made of threads can be decorated with a pompom made from other materials. For example, it could be a piece of cotton wool, a foam ball, large beads, buttons, etc.

Do you know what can significantly transform your home? Thread hat! This decoration looks very impressive, and can be done in literally 15 minutes, subject to training. And what’s most interesting, looking at this product, it’s not immediately clear how it’s made, visually it looks like knitted one, but where are the characteristic loops then?! But the secret lurks on the surface, and in this review “Decorol” intends to reveal it.

DIY thread hat.

You need to prepare the following materials:

• Thick woolen threads (choose the shade as you wish).
• Cardboard paper towel tubes or parchment paper.
• Sharp stationery knife.
• Scissors.
• Optional rhinestones for decoration.
• Gold paint in a can if desired.

The sequence of recreating a Christmas tree hat from threads.

1. Using a sharp utility knife, cut a 9mm wide ring from a cardboard paper towel tube. You can immediately cut off the required number of rings from the tube, from which you can later create the cutest hats. If the edges of the rings are a little uneven, you can correct them by trimming them with scissors.
   
2. From a skein of woolen thread, cut the first piece of thread, 20 cm long. For the first hat, it is better to make pieces of thread with a reserve, and for subsequent ones, adjust their length according to your preference. According to the first cut thread, cut another stack of threads, 15 pieces will be enough for a start, if not enough, prepare more threads at any time.
   
3. Take one thread and fold it in half. In this form, pass it through the cardboard ring, placing it in the center. Thread the ends into the loop and pull the threads tightly. The resulting knot should be located on the edge of the cardboard ring or slightly hidden from the inside.
   
   
   
   
4. According to this elementary pattern, you tie the next thread side by side, next to it another one, then another one, and so on until the entire ring is hidden under the threads.
   
   
   
5. Next, all these threads from the ponytail need to be twisted through the ring. To do this, twist them together a little and push them inside the ring with pressure, and pull them out from the back side.
   
   
6. It's time to create the top of the header. Cut a piece of thread, fold it in half, place it under the top of the hat, thread the ends into the loop and tighten tightly, wrap the ends around the product in a circle, tighten and tie a knot. You can cut off the ends or leave them for hanging. In this example, the ends are cut off.
   
   
   
   
   
7. Now you need to adjust the crown of the hat, recreating the effect of the presence of a pompom. Take scissors and trim the protruding threads in a semicircle, controlling the length of the threads at your discretion. Fluff the threads on the pompom, you can adjust it with your fingers or lightly shake the product.
   
   
8. The final touch is tinting. Take a can of gold paint and tint the product a little; the hat will acquire a subtle shimmer. You can skip this point if you wish, as can the decor with rhinestones.
9. Now you can admire your work.

Yarn hats without using paper towel rolls (video):

A Christmas tree toy in the form of a hat made of threads is made very simply, if not elementary, but how impressive it looks, don’t you agree?! In addition, this pendant is light in weight, so it will not weigh down the branches of the Christmas tree. Overall, we highly recommend making such a wonderful winter decoration.

Charming decorative little hats that resemble touching children's things are very useful for the winter holidays, and can be used for interior decoration, a small gift or even a Christmas tree decoration. The process of making such a cap can be mastered quite quickly, and can even be used for labor lessons.
For work we will prepare: a round plastic bottle, bright yarn, scissors, decorative elements (rhinestones, beads, buttons, etc.).

We cut the plastic bottle in a circle, we get a closed ring. The width of the plastic strip is 1 cm. If the bottle is of large diameter (1.5 - 2 liter capacity), then the ring needs to be cut into two identical semicircles, which are connected into a ring and the ends are secured with tape to obtain a circle of smaller diameter.

We select bright yarn from skeins of thread that you have left over from previous projects, which were lying idle, and might not be needed at all. Yarn can be used in different thicknesses and textures: thin, thick, boucle, sectionally dyed, you can use threads after unraveling things, even if they are not whole.

We cut the thread into equal fragments, each piece should be 15 - 20 cm. Then we fold it in half, thread a loop through the plastic ring and tighten the thread.

If the threads are thin, then we use not one thread, but a whole strand. In the same way, we collect threads around the entire circumference of the ring, placing them tightly to each other.

We get a ring with attached threads. Then we collect the threads into a bundle and push it inside the ring, straightening the ends. The bottom part of the hat is ready.

We form a pompom. To do this, we tie the ends of the threads with additional thread, pull them tightly and cut off the ends. We cut off the threads that come out of the pompom, getting a round fluff on the top of the hat.

If the length of the yarn fragments turns out to be shorter than 20 cm, then the hat will turn out to be single-layer; for the pompom, you do not need to tuck the threads inside the ring, just tie the threads in a knot. We use threads of different colors to make the hat more elegant.