Is it possible to cut your own hair with a clipper? How to cut a man's hair himself with a clipper. How to cut hair at home - step by step instructions

As a rule, when talking about haircuts or hairstyles, they mean women's beautiful ones, while completely forgetting about men's. But don’t think that men’s hairstyles are of no interest. Men's haircuts can easily be called multifaceted. There are many varieties known. These include short, medium and long men's haircuts.

First of all, you will need hair. Its main advantage is its relatively low price. Cutting hair with a machine is quite simple in technique. It is not necessary to buy a professional machine. At home it is quite possible to use household ones. You may also need cheap scissors, the main thing is that they are sharp. Even before you learn how to cut your hair with a clipper, you will need to purchase a good comb. It is best if it has fine teeth.

How to cut hair with a machine?

Before you start cutting, wash your hair and blow dry it. There are professional clippers that can be used to cut wet hair, but it is better not to experiment in this way with a regular clipper.

The head should be roughly divided into the occipital, temporal and parietal regions. You should start cutting your hair from the back of the head. To do this, put the largest attachment in the form of a comb on the machine. After the occipital region is trimmed, you can safely move on to the temporal and then to the parietal part of the head.

How to cut with a clipper - sharply or smoothly? Everything must be done smoothly and slowly. Haste in this case can only do harm. Move the clipper against the hair growth, combing it from time to time. The more often you run the clipper through your hair, the better the quality of the haircut in that area.

In addition, it is important to choose the required hair length. If you were using a 12mm nozzle, you will need to move to a shorter nozzle to reduce the length. You will need this attachment (9 mm) for the occipital and temporal areas. On these parts of the head, the haircut is performed one more time.

To ensure that the transition at the back of the head hardly stands out, at the beginning of the occipital region, press the machine as close to the head as possible. Then, moving up to the parietal area, slowly begin to move your hand away, thereby increasing the angle between the surface of the head and the machine attachment. This will allow a smoother transition from short to longer hair.

Then install the smallest comb attachment (6 mm) and trim the hair again in the lower part of the occipital and temporal area. Hair should be combed in different directions, then the haircut will look neater.

Knowledge of how to cut a haircut with a clipper will be useful to you if you want to cut your husband, son or extravagant daughter’s hair at home. Girls also often like to have very short haircuts. This skill will also be useful for young mothers whose little ones cannot stand the hairdresser and cannot sit quietly in a chair for even a second.

Every girl sooner or later asks the question: how can you cut your hair, for example, to shoulder length, without resorting to the help of specialists and without going to salons, but do it at home, on your own?

It turns out that this is quite simple, because there are many different ways to do this for different lengths and types of hair.

Advantages and disadvantages of cutting your own hair at home

At the same time, we should not forget about the disadvantages, but there are few of them:

What tools do you need for cutting your own hair?

To create your own unique look you only need a few tools.

Before you start cutting, make sure you have:

• Sharp scissors. Good hair cutting scissors cost a lot, but to cut your hair at home yourself, you don’t have to buy a professional tool;
• Thin comb. This comb has teeth tightly adjacent to each other, arranged in one row. Such a comb will thoroughly comb the hair strands, preventing unruly hairs from slipping away and ruining the haircut;
• Mirror, better than two. Like scissors, the most obvious and most necessary detail. Mirrors will indicate any, even minor, defects that can be corrected immediately;
• Spray. You can use any other device that can spray water and wet your hair;
• Clamps. They are needed in order to separate the strands and remove unnecessary ones so as not to interfere with the process;
• Table and chair. The place needs to be set up as comfortably as possible so that there is a good view of the hair.

You can get by with a cheaper analogue of scissors, the main thing is that they are always well sharpened.

Workplace organization

To speed up the cutting process, each tool should have its place.

There should be a large mirror on the table that provides a good view of your head and hair.

And if there are 2 mirrors, it is better to take both, placing them in front of you at some distance from each other so that you can see the left and right sides of the head and even the back of the head.

Place a low chair or ottoman in front of the mirror. The chair should be of such a height that the head is completely visible in the mirror.

There should be a smaller mirror on the table, which you can place on a chair or nightstand opposite, or, holding it in your hands, look at the back of your head.

Comb and scissors should be right at hand,so as not to reach for them.

The clips should also be located in close proximity to the hands or be hooked somewhere very close so that they can be reached even from an awkward position.

A spray bottle will be needed before cutting and, perhaps, sometimes during the process, as the strands dry. Therefore, it can be placed further away than other devices, but at the same time so that it can be easily used at any time.

The place must be well lit in order to see the hair from all sides. It is unacceptable to have your hair cut in the dark or with only one side of your head illuminated, otherwise there is a high risk that the haircut will be uneven.

Hair preparation and haircut selection

The very first thing to do before cutting your hair is to wash your hair well. Clean, damp hair will best reflect the process and final result of the haircut.

Before you start cutting your hair, you need to choose exactly the option that will suit the girl’s face type. For example, any hairstyle will suit an oval-shaped face.

A long face with a high forehead looks good with bangs.

Good to know! Professional stylists recommend wearing bangs and braiding for a long face; this significantly “shortens” the forehead visually.

A square face will suit light curls and thin bangs, this will make the lines of the face smooth. Straight and even bangs, on the contrary, will make the face rougher.

This option of cutting your hair to your shoulders suits almost all face types. The exception is the pear-shaped type, with which such haircuts should be carefully selected.

For a voluminous and voluminous hairstyle, girls with round faces should wear a layered hairstyle on top. Thinning strands just below the cheekbones will help lengthen the face and reduce the jawline.

For girls with a heart-shaped face, experts recommend choosing hairstyles that are not too thick on the forehead and full below the chin.

How to trim your own hair evenly on your shoulders at home. Step-by-step instruction

The easiest way for a beginner to cut his own hair is to trim the ends.

For beginners, below is a detailed description of how to do this smoothly:

Be careful! Curly hair should always be cut below the planned length, while thick or coarse hair should be cut in small sections so that the end result is even and neat.

Understanding how to cut your hair past your shoulders if you have curly hair takes practice.

But to prevent your hair from turning into some kind of bob, you need to retreat a few centimeters below the given length.

Trimming the ends of long hair

Trimming the ends of your hair is very important for their health, especially for long ones. This will prevent your hair from splitting.

What can cause split hair:

There are several techniques for cutting ends, and which one to choose depends on how long the hair is and how much it is cut:

Elimination of split ends of hair

It is impossible to eliminate an existing section without cutting, but you can prevent its occurrence.

Split ends are called trichoptilosis, and there are three types:

• general hair separation;
• when delamination is repeated several times on one hair;
• hole in the middle of the hair.

These problems apply not only to long hair, but also to shoulder-length hair, and, of course, it definitely needs to be cut, and you can even do this to yourself.

To prevent splitting, You should always use scissors to cut your hair. Stationery clips are not intended for cutting; they only injure the hair, turning the ends into fringes, which only contributes to split ends.

Regularly trimming the ends can help eliminate the problem of split ends. It is enough just to cut off 0.5-2.5 cm once every 6-9 weeks.

The basic rule is to cut off the section completely, even a little more, so that it does not appear again.

Products that promise to cure hair from split ends do not eliminate the problem, but only glue the splits together, but such products can help if you use them before the problem appears.

How to cut hair with a ladder

The instructions are as follows:

Important to remember! Elastic bands should only be used tightly so that the hair does not move out, but stays straight, this applies to both long and shoulder-length hair, so that it is convenient to cut your own hair.

This haircut will look best if you choose the option of cutting your hair to your shoulders. It will look best and most noticeable on shoulder-length hair.

How to cut your own hair to your shoulders

In order to cut your hair on your shoulders as efficiently as possible, you should wash and comb your hair well.

And you need to cut your hair like this:

1. Starting from the crown, take a strand about 1 cm thick, count from about 5 to 8 cm and cut off the rest. This is the control strand.
2. Now, one by one, comb the rest of the hair towards it from the top of the head and cut off the intended length.
3. Next, the side strands are also trimmed along the length of the crown.
4. Afterwards, the temporal and parietal zones are compared in the same way with ready-made strands.

The result is a beautiful voluminous hairstyle.

How to cut short hair yourself

With a short haircut, the instructions have some differences:

“Cascade”: doing your own haircut

Follow the instructions:

1. To trim the “Cascade” yourself, gather the tail on the forehead.
2. You should roughly imagine the length of the hairstyle, and then cut off the excess in the ponytail. We check several more times to see if there is any excess coming out of the cut strand.
3. After everything is perfectly straight, all you have to do is remove the elastic band and comb your hair - and the “Cascade” is ready.

A hairstyle like “Cascade” looks very beautiful and feminine on shoulder-length hair. Self-cut hair looks very beautiful.

How to cut your own hair into a bob

To make yourself a bob, you need to follow the instructions:

How to make your own bob

You must proceed as follows:

Cut your own hair short

This instruction will tell you how to cut your hair short:

How to cut bangs beautifully

The bangs are the main part of the hairstyle that loses its shape first and needs to be trimmed more often.

And in order not to run to the hairdresser so often, you can safely do it yourself.

Experts give several examples of different types of bangs that you can make with your own hands.

Long straight bangs

How to do:

Air bangs

For this type of bangs, you will definitely need thinning scissors.

You need to cut your hair like this:

Long side bangs

If you are cutting your hair for the first time, experts recommend not getting your hair wet so that you can see the results right away.

How to cut this type of bangs correctly:

How to use a hair clipper and how it can be useful

To learn how to use a hair clipper like a professional, you need to follow just a few tips:

Hair clippers are affordable and come in a wide variety of models.

A large number of modes allow you to trim a mustache, beard and sideburns for men, and will also help you create a variety of haircut options for both men and women.

The machine can not only make a man’s haircut from scratch, but also help in creating a woman’s hairstyle.

There are only 2 types of hairdressing tools: main and auxiliary. The main ones include scissors (not only regular ones, but also thinning ones) and combs. All other tools are auxiliary.

Every hairdresser has their own personal secrets.

But there are basic tips that all professionals give when choosing tools:

You can be your own stylist and change haircuts no worse than in a salon, at home, with your own hands. You just have to practice a few times, learn the rules and nuances of hair cutting, and the result will definitely please you many times over!

From this video you will learn how to cut your hair to your shoulders or to a different length:

In this video you will see how you can cut your hair yourself at home:

Haircuts can cause a blow to any family budget. If you learn how to cut your man’s hair yourself, you can save a lot of money!

Attention ! Many hair cutting tools can cause damage. Be careful while cutting.

Step #1: Cover the man and comb his hair

Cover the man with a hairdresser's cape, towel or sheet so that hair does not get on his clothes and it is easier to remove it. Use a comb to comb his hair.

Step #2: Choose a nozzle for the machine

Ask him how short to cut it. Typically, hair clippers have several attachments that determine the length of the hair to be cut. The longer the nozzle, the less hair will be cut.

Step #3: Start cutting with a clipper

You should start from the back of the head: placing the nozzle on the skin, move from the back of the head up through the hair to approximately half of the head. Treat the entire back of the head in this way. The upper part should be left for processing with scissors.

Step #4: Moisturize your hair

Use a spray bottle to dampen uncut hair.

Step #5: Trim the Top

Then you should trim the top. Comb all uncut hair forward, then, starting from the back and working towards the front of the head, comb upward sections of hair more than one centimeter thick. Holding them with your middle and index fingers, trace them to the required length and cut off any excess above your fingers. You should cut at an angle, using scissors for cutting, so that the cut does not look uneven or blunt.

Clue! When cutting a new strand of hair, you must always pinch a part of the cut strand between your fingers, which can serve as a guide for length.

Step #6: Trim your bangs

When you reach the front of your head, you need to comb your bangs down. Holding the scissors pointing upward, make small cuts with the tips of the scissors. The cut should be made at an angle to create a smooth transition of the strands.

Step #7: Make a smooth transition of the haircut line

Using a fine-tooth comb, comb the strands upward in the area where the clipped hair meets the scissor-cut hair. Using scissors to trim the hair that sticks out of the comb, making a smooth transition and erasing the sharp line separating the cut with scissors and the clipper. Work this line along the entire circumference of your hair.

Clue! Using a comb, hold it with its teeth pointing straight up and try not to tilt it either back or forward.

Step #8: Trim your neck and sideburns

Using a clipper without an attachment, you need to trim the hair around the neck and around the ears. Process the sideburns, leaning back from time to time to look at the man from the front and make sure that they are even. You should start at the top and work your way down with the clipper to avoid cutting too high.

Step #9: Show him the result

Show the man your work in the mirror and make any final adjustments. Use styling product if desired.

Men's haircut technology

You can either make a fairly short haircut using a clipper, or you can create some elements as part of a more complex haircut, which is done with scissors. But in the summer, when the heat forces you to get rid of any additional “warming” factors, even very convinced dudes often abandon long haircuts in favor of shorter, but quite comfortable haircuts. And you have the power to help a man (friend, brother, son, dad, lover, husband) ease the burden of his overgrown hair a little and give him an easy haircut with a clipper. Even if you have never done this before, it is not necessary for the man to know about this in order to avoid unnecessary worries and worries on his part. Therefore, just arm yourself with a typewriter, put on a confident (knowledgeable) face and feel free to start working:

• Hold the clipper in your right hand (assuming you are right-handed) and the comb in your left hand (or vice versa). Place the machine on your palm with the knife facing away from you, clasping it with four fingers from below, and place your thumb on top.
• Put on the required size nozzle. If you do not have much experience in using a machine, then you should start with the largest nozzle of 12 millimeters, then in case of an error you will have the opportunity to cut off the failed areas with a shorter blade.
• Comb your hair in the direction of growth. Keep the clipper ready at all times and comb and straighten your hair as needed. If they are longer than five centimeters before starting the haircut, then the process can be complicated and made painless (the clipper gets caught and pulls the long strands). But you can shorten your hair up to five centimeters with scissors before you start using the clipper.
• Start working from the back of the head. Place the knife of the machine on the neck at the bottom edge of the hair growth, turn on the machine itself and gradually move it against the hair growth along the back of the head.
• Try to move your hand not in one long movement, but in many separate movements - this way the haircut will be neater and cleaner, and the hair will not be pulled behind the blade and cause unpleasant sensations to the man.
• But at the same time, all movements should not be fast, but measured and performed at approximately the same speed. Press the clipper tightly against your head and do not change the angle of its inclination relative to the surface during the haircut.
• Having worked the back of the head, you can begin to move to the crown. At the same time, it is not necessary to change the attachment to a smaller one, especially since cutting a haircut with one attachment is always easier for beginners. You should also remember that you should always cut against the direction of hair growth.
• Trim your temples last - it’s even better to take a shorter attachment for this. For example, the next one from the set in order. Be especially careful at the temples and take your time, because this is where hair often grows in different directions, and it’s quite easy to ruin a haircut.
• Finally, when all the hair has acquired the required length, put the smallest attachment on the clipper and do what hairdressers call edging. That is, smooth out all the irregularities that have arisen, as well as length transitions around the perimeter of the beginning of hair growth. You can leave your forehead alone, but on the neck and temples the edging will give the haircut a complete look.

If you follow these rules and follow the sequence of all actions, cutting a man’s hair with a hair clipper at home is, in general, not difficult. over time, if you don’t stop training, you will get better and better, and it is possible that your household will completely replace the professional hairdresser with you. And in the case of a wayward child, this is generally an excellent solution to the problem of whims and tears in the hairdresser's chair: now you can cut your son's hair in a quiet home environment. Perhaps over time, your friends who love boyish, stylish short hairstyles will trust their heads to you. But even now, if you try, you will get a men’s haircut with a clipper neatly and evenly enough so that you won’t be ashamed to show yourself to people. And you can improve your own skills with the help of numerous lessons in the media, testing them in practice, or even by attending lessons from a professional teacher. Good luck to you, the most beautiful haircuts and grateful “clients”.

Men's haircut with a clipper is possible at home! Don't have enough time to visit hair salons? Then pick up a modern model of hair clipper and get down to business.

What to cut with?

For each type of haircut, you need to choose an attachment appropriate to the length of your hair in order to get the desired result. When choosing a machine, you should take into account the design principle of the device.

For a home hairdresser, it is better to buy a rotary machine with two speed switching modes: it is more reliable in operation. The speed switching mode will help you cope with the processing of problem areas: it is better to cut them at low speeds.

The attachments for the machine are either fixed or removable. Choose a removable option with hair length adjustment: you will have the opportunity to set the length of the haircut without changing the part during operation. Self-sharpening blades are an ideal option for the home craftsman: no need to buy new ones, no need to sharpen them yourself. Please note that dull blades begin to “chew” the hair, which is painful.

Why do you need thinning scissors?

Hairdressers always have serrated scissors in their arsenal. This tool is used to make your hair look natural, smooth out the transition from one length to another, and also to reduce excessive hair thickness. They work with thinning scissors paired with a comb, which lifts the hair.

Head zones

Before you get your first haircut with a clipper, you need to become familiar with the division of your head into working zones. In hairdressing, it is customary to divide the surface to be treated into the following areas:

• parietal zone (interior);
• temporo-occipital zone (exterior);
• separation zone.

The interior is the bangs and the top of the head. When cutting, you should consider the direction of hair growth. The hair of the temporo-occipital part goes down, however, the direction of growth also varies. The dividing zone represents the boundary between the parietal and occipitotemporal regions. The direction of growth is down.

Types of haircuts

There is a certain type of haircut for a machine that you can do yourself:

• sports;
• universal;
• below zero;
• hedgehog.

Operating rules

To prepare your hair for work, you need to wash it and dry it well. Then, using a comb, lay it in the direction of growth.

Important! With a comb the hair is styled in the direction of growth, and with a clipper it is removed in the opposite direction - against growth.

1. The machine only works on dry hair.
2. Movements should be smooth, directed against hair growth. If you abruptly remove the clipper from hair, you can cause pain to a person: hairs will remain in the blades between the teeth.
3. Strands can be lifted using a fine-toothed comb.
4. The blade should be pressed tightly against the head and slide easily across the surface.
5. The hair is removed with a machine in strips: first, the central strip is drawn, then on the sides of it.

After completing the main haircut, edging is done. It is performed with the upside down side of the device without a nozzle. The desired geometry of the edging is made using the teeth of the machine.

Advice. Do not forget to periodically shake the device to remove accumulated hair so as not to interfere with the haircut.

The simplest haircut at one length

If you are holding a clipper in your hands for the first time, start with the simplest men's haircut. To do this, you need to install the required nozzle with the selected cut length and carefully move it over the head, treating all zones in turn. First we cut the back of the head, then the temples, and finally the frontal part of the head.

Advice. When working with the machine for the first time, choose the nozzle with the longest length (for example, number 11). If you mess something up, you will have the opportunity to fix it.

Haircut with transition to different lengths

The machine haircut technique requires compliance with the following conditions:

• You need to start working from the back of the head, smoothly moving from the temple to the parietal area. The larger the area you cover in one movement, the more beautiful the hairstyle will look. For cutting we take a nozzle with number 9 mm.

Advice. To carefully remove hair from the temple area, work slowly and carefully observe the direction of growth. In this part of the head they grow in different directions.

• Use a nozzle number 11 or 12 to remove interior hair. To make the transition from one length to another smooth, slightly raise the blade without pressing tightly to the scalp.
• After processing the bulk of the hair, you should replace the nozzle with a smaller one and process the area of ​​the temples and back of the head again, forming a short cut of the edging.

Important! You cannot change the angle of the machine during the cutting process.

Boxing haircut

Boxing and Half-boxing haircuts are considered very stylish, although they belong to the sports category of hairstyles. They go well with different clothing styles, which shows their versatility. This hairstyle is suitable for hair of any structure and thickness. However, the shape of the skull for this haircut must have ideal outlines, because the hairstyle reveals all the defects.

To work, you will need a machine with attachments numbered 3 and 1.

1. The interior is cleaned using finger-tip technology.
2. The temporo-occipital region can be cut down to the frontal part if desired.
3. The transition line from one length to another can be adjusted using scissors.
4. The bangs are cut either obliquely or at a height of 2-3 cm from the eyebrow line.

To get a Half-Box, you need to remove the interior with a nozzle with number 4. Also, various variations are allowed regarding the bangs. If you remove all the hair except the bangs with a clipper, you get a bangs haircut.

Hedgehog haircut

At first glance, the Hedgehog may resemble the Boxing haircut, however, there is a fundamental difference. If in Box the transition between different lengths stands out in contrast, then the Hedgehog is styled with a smooth transition from long to short hair. This type of hairstyle is only suitable for thick, dense hair.

1. First, long hair is removed “on the fingers” in the crown area, leaving the length within 4 centimeters.
2. Then a styling product (gel or wax) is applied to the hair and fixed with a hairdryer in a vertical position.
3. The bangs are combed in the direction of the crown and fixed with a stream of air.
4. The temporo-occipital region is treated with a machine to the line of the dividing zone. The transition from interior to exterior is made by making overlapping stripes: we slightly grab part of the treated surface with the untreated surface together.
5. The edging in the neck area is either eliminated or a minimum of hair is left.

Advice. We gradually reduce the length from 4 cm in the interior area to one centimeter in the back of the head, regularly checking the quality of the haircut using a hairdryer.

Haircut to zero

A universal haircut for all occasions. Suitable for men with regular facial features, a strong-willed chin and a beautiful skull shape. In cases of rapid hair loss, this type of hairstyle is literally the way out. To work, you will need a machine with nozzle number one, as well as a safety razor and a comb.

1. We remove long hair using scissors.
2. We first shave the occipital-temporal part with a clipper in three directions: vertical, horizontal and diagonal.
3. Finally, we adjust the haircut with a safety razor.

How to avoid leaving bald spots?

Nowadays, haircuts with a pattern that is cut using scissors or a machine have become fashionable. Looks beautiful!

However, if you do not use the machine carefully, you can accidentally leave a bald spot on your hair. This may happen if you:

• combed poorly before cutting;
• wet hair and did not dry it;
• didn’t wash your hair before work;
• tried to make a pattern on my hair using an attachment.

Poorly combed hair can clog the blades of the nozzle, which will cause the formation of a bald spot or cause pain (the machine will tear the hair).

Do not cut with a machine on wet hair. The blades quickly become dull, and this is fraught with various surprises during work.

If you haven’t washed your hair before cutting your hair, sebum will clog the blades, which means you’ll be in trouble.

It is better not to make a pattern on your hair at home. The consequences of such an experiment will have to be removed with a haircut to zero.

To avoid making mistakes when cutting your hair, watch the training video:

Many people today prefer to use hair trimmers themselves. The popularity of the clippers is easy to explain, because purchasing and maintaining them is much cheaper than constantly visiting a hair salon. In addition, having mastered the skill of using this device, many simply do not want to trust their appearance to strangers and, especially, pay money for it. Using the machine at home is quite simple; all you need to do is follow some rules and show a little patience. Once you gain experience, working with a hair clipper will not take much time and will leave an extremely positive impression. Let's figure out how to use a hair clipper and which attachments are best to choose.

The design of the machine is quite simple and has not changed for decades. In essence, current models of devices are not much different from their predecessors twenty years ago.

One of the first hair clippers

Exists several types of hair clippers, into which these devices are usually divided in a professional environment. Here is their list:

• vibration machine;

• rotary machine;

• battery machine.

Each of them is based on a motor that rotates (or vibrates) the knives that shave hair from the head and face. An important factor in the operation of the machine remains the blades, which have a special coating. Most often they are titanium or diamond. The best blade option is a high-quality stainless steel alloy. Such knives do not pull hair, cut it neatly, and also become dull much more slowly than their counterparts.

Some models have a more powerful motor and are designed for any thickness of hair, others are designed exclusively for trimming and giving the hair a neat shape.

Hair cutting occurs due to the rotation or vibration of knives (blades) in all types of clippers. The intensity of vibration and the speed of their rotation depend on motor power. The more powerful it is, the more capabilities the device has. Not every machine can cope with thick hair, especially if the hair is very coarse and dense. In such cases, power will play a decisive role. Therefore, it is necessary to choose a hair clipper at home based on how it will be used.

In addition to power, the device design is different way of eating. Most models are equipped with a cord for a 220V outlet, but there are also some representatives of battery-powered and hybrid machines that can work autonomously. True, such models require constant recharging and can run out of charge at the most inopportune moment. But a cordless machine provides more comfortable operation.

So, each machine consists of the following elements:

• motor;
• power supply (battery, cord);
• blades (knives);
• nozzles

It is worth dwelling on the latter in more detail, because This type of accessory represents an additional opportunity to expand the basic functions of the device.

Brief overview of attachments

The nozzles have a fairly simple design, which ensures easy and quick replacement when the need arises. Accessories are usually divided into the following types.

Most often, hair clippers come with replaceable attachments. True, in the case of budget models, their choice can be very limited (one, at best 2-3 attachments). Accessories can be purchased as a set, but do not forget that most often at home the user rarely needs more than two or three types. Before you consider purchasing an additional set, you should be clear about your needs. Otherwise, having bought a complete set with 5-7 types of attachments, there is a risk that most of them will lie idle. In addition, such sets are often quite expensive.

The best option would be to purchase a nozzle as the need arises.

Attachments may vary in quality and the material from which they are made. There are options made of metal, plastic and even silicone. Plastic ones are ubiquitous and inexpensive. Metal ones are the strongest and most durable; the prices for such attachments are at an average level. Silicone ones are a new invention in the hairdressing market, so they are the most expensive. Their touch is pleasant to the scalp, and it is convenient to use such accessories.

When purchasing attachments, it is important to study which models of machines they are suitable for, because... There is no single universal standard for all models. There are a number of manufacturing companies that produce standardized nozzles for several brands, but in each individual case it is important to study the specification and model for which they are intended. “Unified” attachments, suitable for several models at once, are equipped with a spring at the base of the mount, which allows them to be used in several models at once.

There is an opinion that a real specialist is able to make a neat and interesting haircut without any attachments at all. However, the more attachments a hairdresser has in his arsenal, the more free his hands are and the less limited his imagination is. The attachments will be useful for young professionals and those who are just starting to take their first steps in cutting hair at home.

Scalp hair cutting techniques

There are several men's haircuts that you can easily master on your own, spending a minimum of time and effort.

Universal

You should start with a universal, simplest haircut. This technique is easy to use even for those who are holding a hair clipper for the first time. When performing a universal haircut, you don’t even need to change attachments. This is how it should be produced.

Boxing and semi-boxing

The next haircut that you can do yourself is called boxing or half-boxing. Despite the fact that this haircut has a very rich history, and it is difficult to call it new, it is still very popular among men of all ages. However, if you consider that a well-made half-box gives confidence and emphasizes masculine facial features, the popularity of the half-box will not seem so surprising.

There is one caveat: you can get a boxing or semi-boxing haircut only if you have the correct skull shape. If there are bumps, bumps, birthmarks, etc. on your head, you may need to look for a different haircut.

Any short haircut emphasizes any imperfection - this should be remembered. The thickness and density of your hair will not play a role, because... you cut your hair pretty short.

If you want to leave bangs, it is important that they do not contrast in size with the length of the rest of your hair. In the boxing version, the bangs should not be left too long; the haircut style does not imply this.

As for half box, then it is executed as follows:

1. All hair growing below the center of the back of the head should be cut as short as possible.
2. The upper part of the treatment zone will lie along a line called the “control”. It connects the upper part of the occipital region with the tips of the ears.
3. The strands on the temples are cut to the same level as the prepared occipital area. Here it will be important to make a smooth transition from short to longer hair. To do this, the length is leveled two centimeters above the conventional border. You can use the appropriate attachment or use scissors.
4. The parietal strands are cut with scissors, and it is most convenient to help with your second hand, pinching the strands between your fingers.
5. Thinning is the finishing procedure; it is carried out either with scissors or a machine.

Hedgehog

The technique of this haircut is quite simple to do yourself. In addition, this hairstyle will be relevant at all times. Millions of men choose it for everyday wear because it is practical and emphasizes masculine features. Mostly crew cut owners of thick and coarse hair. Some say that this type of haircut is very similar to a half-box, but this is not entirely true. In a hedgehog, there are no clear transitions from short hair to longer hair. In the case of this hairstyle, the transition is smooth and almost imperceptible. The haircut is performed as follows.

1. The parietal area is trimmed using scissors. Recommended length no more than 4 cm.
2. After trimming, a little gel or wax is applied to the head, the hair is styled with a candle (if necessary, you can use a hairdryer).
3. The bangs are combed towards the parietal region.
4. The temples and back of the head are smoothed using a hair clipper, trying to make the transition from long to short hair as unnoticeable as possible.
5. The neck should either be completely shaved or left with a small layer of stubble.

Naked

In common parlance it is called “under zero”, which very accurately reflects its essence. When a haircut is bald, all the masculine features of the face, eyes, cheekbones and chin are emphasized. Recommended to wear in case of formation of unsightly bald patches or alopecia areata.

1. First of all, you should trim your long hair to prevent the clipper from getting tangled in it.
2. You need to start cutting your hair from the back of your head and temples, moving in three directions at once: from top to bottom, and then left and right.
3. If any unevenness remains, you can use a razor or a special attachment to straighten the hair to the level of stubble (1 mm). Typically, such attachments are available in beard trimmers, in some models of clippers, or in additional sets.

Secrets of using a hair clipper

The main thing is experience, but without understanding some of the mechanisms, the process of obtaining it can be significantly delayed. To begin with, you shouldn’t try to cut everyone’s hair you can reach. If you are not confident in your abilities (even though you have the desire), you should not experiment on your loved ones, because they may be dissatisfied with the result. Sooner or later, there will definitely be success, you just have to be patient and start from your own head.

1. Try to study as many videos as possible on the topic of haircuts at home. You need to understand how the device works, how it fits in your hand, and what the limit of its power is.
2. Don't be afraid to do something wrong. Almost everyone makes mistakes; it is unlikely that any of the specialists in their field became one the first time.
3. It's better to start with short haircuts, they are easier to learn, and in case of failure, there is always the “zero” option, which will hide the unsuccessful attempt. You can continue the experiment as your hair grows back. The main thing is not to give up if it doesn’t work out.
4. If the hair on your scalp has become thin, it is best to run the central part of the blade or the selected attachment through it.
5. After finishing the haircut, it is better to use blowing from a hair dryer- this will make cleaning much easier. Also, after cutting your hair at home, it is recommended to take a shower to wash off any remaining hair.
6. There is no point in purchasing a professional-grade hair clipper without at least some experience in cutting hair at home. And even more so, don’t rush to order the most complete set of attachments for a lot of money. Starter set A novice hairdresser may well limit himself to a simple but reliable device with two or three main attachments necessary for creating smooth transitions and defining boundaries.
7. Any technical device requires maintenance, especially when it comes to direct contact with the hair and scalp. Experts recommend disinfecting steel blades from time to time, thoroughly cleaning them from dust and small hair.
   
8. Before you start cutting your own hair, you should choose a few simple haircuts that you can do at home. The main thing is not to focus on the nozzle; if necessary, you can buy additional ones. It is better to choose the simplest options and gradually complicate the tasks.
9. Before starting a haircut, it is best to study the characteristics of your hair, its growth rate, fragility, hair density, etc. In case of any difficulties, you can contact a trichologist.
10. Most machines are either universal or right-handed. You should find out in advance what orientation the model you like has, so that there are no inconveniences in the future.

It is important to remember that any independent haircut cannot be compared with a professional one, if only because the person cutting himself cannot see his own head from a distance, in its entirety. As a result, the picture when working with a machine or scissors is not entirely complete. A hairdresser will always better evaluate a client's hair. However, for simple haircuts, which most men choose as their main ones, this will not be a serious obstacle.

It is difficult to create a model haircut with your own hands, but a half-box or crew cut is quite possible.

Don't try to save on consumables. This does not mean at all that you need to buy all the most expensive things, but if we are talking about a set of three attachments, it is better to choose more carefully and not settle on the most affordable model.

It will be much more convenient if, in addition to a comfortable grip, the handle and body contain several rubberized parts or soft-touch coatings. This will make it much easier to use. The device will fit better in your hands and will not slip.

Machine body with rubber coating

If you choose a model with a power cord from an outlet, you should pay attention to its length. The longer the wire, the more wiggle room there will be. Of course, battery-powered models provide more maneuverability, but they are not suitable for everyone for a variety of reasons.

There is nothing difficult about starting to cut your hair at home. Thus, you can not only acquire a useful skill, learn something new, but also significantly save your family budget on hairdresser services. When starting to learn how to cut your own hair, you need to be patient and tune in to an excellent result - then everything will definitely work out.