Games weaving from rubber bands to play. Bracelet made of rubber bands: French braid. Bracelet made of rubber bands on a fork

Weaving from rubber bands is a new type of handicraft.

It appeared quite recently, however, it quickly gained popularity among children and adults.

From small multi-colored rubber bands, which can be easily purchased at a stationery store or where they sell hairpins, you can easily and quickly make beautiful and bright decorations:

  • bracelets;
  • pendants;
  • necklace;
  • belts;
  • rings, etc.

Thanks to a wide range of shades, accessories made from rubber bands are unique, and every needlewoman will be able to find a color scheme to suit her taste.

There are various techniques for weaving rubber bands:

  1. Weaving on fingers.
  2. Weaving on a loom or small loom.
  3. Weaving on a fork.

These techniques involve weaving both simple patterns that even a child can handle, as well as more labor-intensive ones.

For weaving, in addition to the elastic bands themselves, you will need the following tools:

  • hook (take a simple crochet hook No. 3-4, it differs from the special one in the size of the head and rounding);
  • weaving machine - can be of various modifications with 2 or more rods for fixing elastic bands;
  • regular table fork;
  • rubber bands, they come in bags and come with a plastic hook, sometimes with a slingshot - this is a small machine, as in the photo below.


The set of tools may vary depending on the chosen technique. On the Internet, it is now easy to find a huge number of master classes on weaving from rubber bands. Many of these lessons are provided with detailed descriptions and video instructions in Russian.

Basic weaving pattern


In order to learn how to weave from elastic bands, it is best to start with the simplest basic pattern that does not require special equipment. One such pattern is the chain pattern.

The chain weaving process consists of the following steps:

  1. We put an elastic band twisted in the shape of a figure eight on the index and middle fingers;
  2. We do not twist the next elastic band, but simply pull it next to the first one;
  3. We remove the first elastic band from the fingers, threading it onto the last one;
  4. We continue in this way until we obtain the product of the required length;
  5. At the end of the weaving we attach an S-shaped fastener.

Tutorial video on weaving a chain:

For those who find this pattern very simple, we recommend trying to weave a French braid bracelet, which has detailed video tutorials and step-by-step photo instructions.
This article will help a beginner cope, as each step is explained in detail. It is suitable for both owners of the machine and slingshot, and those who do not have them. The finger braiding option is the simplest, which is why it is described in this article.

For those who want to weave only on a machine, we suggest making it yourself. All the ideas on what can be used to make a loom for weaving from rubber bands have been sorted out. And these are: Legos, nails, boards, bolts or screws, an eraser, pencils or chopsticks. Come in and choose the machine option that suits you, so that after 30 minutes you can weave any bracelet!

Flower rubber band bracelet


This bracelet model is also woven without using a machine. To work you will need:

  • pencils - 3 pcs.;
  • hook;
  • clasp;
  • colored elastic bands of green-36, orange-12, pink-24, purple-12 and red-7.

Weaving a bracelet with a flower takes place in two stages:

  1. Making a flower. We weave 6 petals from orange, pink and purple elastic bands. The weaving of flower petals is based on the “chain” pattern discussed above. We connect the flower petals by stringing them on a red elastic band and securing them with a green one.
  2. Making the bracelet base. We weave a plait with a fishtail pattern, starting with the first green elastic band of the flower. For this weaving, we put an elastic band twisted in a figure eight on two pencils, and on top we string two more untwisted ones. We remove the first elastic band and stretch it through the last two. We weave in this way until the desired length is reached. We connect the ends of the bracelet and secure them with a clasp.

For more details on the process of making a bracelet with a flower, watch the following video tutorial in Russian: >

Bracelet made of rubber bands on the machine

This original decoration is not at all difficult to make. We will need:

  • weaving machine;
  • hook;
  • rubber bands of two or three colors (imagine a bracelet, in what order you want to see it, arrange the rubber bands);
  • clasp.

The first step is to decide on the sequence of colors in the drawing. For a sample, arrange the rubber bands in the desired order and refer to it as you work.

  1. To start weaving, stretch three elastic bands onto adjacent posts of the machine: twist the first elastic band in a figure eight.
  2. We will put on the next two as is.
  3. Next, grab the bottom elastic band with your hook and thread it through the other two.
  4. Then we’ll put on one new rubber band and remove the bottom one in the same way. We will continue this way until the end of the work, and then we will connect the ends of the resulting bracelet using a clasp.

The video will teach you how to weave a bracelet from rubber bands on a machine:

Bracelet made of rubber bands on a fork


The “iris” bracelet is a classic version of weaving on a fork. To work you will need:

  • fork;
  • elastic bands of all colors of the rainbow;
  • thin hook.
  1. At the beginning of weaving, fold the first elastic band in half and, twisting it in a figure eight, put it on the two central teeth of the fork.
  2. We pull the next two elastic bands in pairs onto the left and right teeth in the same way.
  3. Now we remove the initial elastic band, stretching it from above the central loops. To prevent the elastic bands from slipping, we move the entire canvas down along the fork.
  4. Then we place the elastic band folded in half, but not twisted, on the middle pair of teeth, and remove the previous row on top of it.

Thus, we alternate: elastic band in the center; elastic bands on the sides. Repeat two or more rows for each color.

To complete the weaving of the product, we throw the loops from the outer tines of the fork through the central ones, and then the lower ones through the upper ones. On the remaining 2 loops in the center we put on the last ring folded in half and pull the loops through it. All that remains is to throw one loop over the other and secure the weave with a clasp. The bracelet is ready!

The video will teach you step by step how to weave a bracelet from rubber bands on a fork:

Don’t know what you can weave with rubber bands? This photo and video will illustrate in detail different products and options for their creation.
Insects and animals, birds and rings, necklaces and amphibians. How to weave such things and on what: a loom, fingers, without a loom can be easily repeated in the video.

Those who want to master the technique of weaving three-dimensional objects, we recommend starting with weaving eggs from rubber bands. The article describes and shows different weaving options, both without a machine (on forks) and with it.
If you are ready to start right now, you will find video master classes at this address.

Panda rubber band decoration


In addition to bracelets, other accessories are also woven from elastic bands. The following video tutorial explains in detail how to weave a keychain in the shape of a funny toy. Weaving a “panda” keychain requires initial training, so you should tackle it after training on simple jewelry and if you have a machine.
If you don’t have one, then how to make a weaving machine using video instructions is described in this article.

The video will help you weave a panda decoration from rubber bands on a machine:

This article examined a variety of patterns and techniques for weaving products from rubber bands. However, this is only a small part of the whole variety of options. By using different colors and being creative, you can easily master or come up with more complex patterns on your own.

Weaving from rubber bands will be interesting for both teenagers and adult craft lovers. In addition, this hobby is exciting and useful for children, promoting the development of fine motor skills and perseverance.

Rubber bracelets in the world are already called Rainbow Loom a cult. Children and adults were seriously captivated by the new product. Haven't embraced this trend yet? Let's get started!

You've probably seen bright woven bracelets on a child's wrist. And not just kids. The main fans of their sons and daughters - mothers and fathers - also wear this trendy item as decoration.

What is this? This is an educational game - weaving bracelets from rubber bands, which in the world is already called the Rainbow Loom cult. . According to BBC News, Rainbow Loom is one of the three best-selling toys on the planet. From simple children's entertainment, rubber bracelets have turned into a fashion accessory. Children (and what can I hide, and adults) combine the colors of rubber bands so intricately that these bracelets become the main feature of the look.

So, in order to keep up with the times and keep up with our beloved offspring, we, mothers who have not yet learned how to weave rubber bracelets, also decided to master a new... (let's not be afraid of this word) art.

So what isRainbow Loom

Nowadays, in almost every children's store you can find little bags with colorful rubber bands. In addition, special machines are sold for them; even small children can use them to make bracelets from rubber bands with their own hands.

The machine is a small plastic platform with pegs on which you can attach rubber bands and, creating loops, connect them using a special hook.

And the creator of this miracle machine was engineer Chong Chun Ng. “Rainbow-Loom-dad” was testing Nissan cars, and his daughters made jewelry for themselves from hair bands. But the girls found it difficult to tie knots on their products. And then Chong Chun Ng, like a true loving father, decided to help his girls, and for one thing, all the children of the world who wanted to make interesting designs out of rubber bands, and invented the Rainbow Loom machine.

Already in November 2013, 1.2 million of these toys were sold. And Rainbow Loom bracelets were seen on the wrists of Kate Middleton, Emma Watson, Julia Roberts, David Beckham and other stars.

Conclusion: fatherhood is inspiring! :) And motherhood too, you and I know that for sure;) Therefore, it doesn’t cost us anything to make a Rainbow Loom machine with our own hands!

How to make a machine with your own hands

You can make a machine for weaving rubber bracelets yourself. For this you you will need:

  • board or small wooden block,
  • nails (curved),
  • hammer,
  • insulating tape,

How to do:

  1. At a distance of several centimeters, make marks for nails on the board with a pencil.
  2. Carefully drive horseshoe nails into the marked places.
  3. We seal the edges of the board with bright electrical tape.
  4. The machine is ready.

In addition, you can make a hook for weaving bracelets from thick wire (or a metal paper clip - just straighten it out). And you can make a handle for such a homemade hook by wrapping the edge of the wire several times with electrical tape. You can store rubber bands for loom weaving in egg trays. They can also become an organizer for ready-made bracelets. The simplest bracelet made from rubber bands on a machine (video).

How to make a bracelet from rubber bands without a machine Promum also knows how to weave a bracelet from rubber bands without a machine. For this you will be needed :

  • rubber bands (about 50 pieces),
  • clasp for a bracelet (sold or you can try and just tie the ends of the bracelet),
  • sleight of hand and no fraud

How to weave:

  1. One hand will serve as a machine. Place the rubber band on your middle finger, pull it tight and make an infinity sign on your index finger.

  1. In the same way, put two more elastic bands on your fingers.
  2. Remove the bottom elastic without removing the top two. She will connect the two elastic bands that are on the fingers.
  3. Put on the next elastic band in the same way as the previous ones.
  4. Again, secure the upper ones with the lower elastic band.
  5. There should always be three rubber bands on your fingers at the same time: the lower one needs to tighten the upper ones, alternately, on each side.
  6. Continue weaving to the desired length.
  7. After this, fasten the clasp on both edges of the bracelet.
  8. The bracelet is ready!

The principle of basic finger braiding is exactly the same as shown in the video:

Weaving such bracelets develops fine motor skills, calms, occupies, distracts and entertains. But this game can captivate a child so much that you won’t have time to notice how there won’t be a single empty space left in the house, and all relatives, friends and loved ones will wear bracelets, including the parrot.

Therefore, you should not stop only at bracelets. The whole world is already weaving necklaces, bags, all kinds of figurines and even clothes from these rubber bands.

Not just bracelets - what can be made from rubber bands

Here you will find thousands of games that you are sure to enjoy! Our games about embellishment, dress up and makeup games will help awaken the stylist in you, and horse games and others animal games will allow you to get to know nature better! On GGG.ru full free games for girls! Princess games will make you feel like royalty, cooking games– improve culinary skills, and music games will develop creative abilities! Play with your friends online to beat their records and show each other your work! If you are looking funny games for girls, website– what you need, because new free games appear on girls go games.ru daily!

website always offers the widest choice free games online. Absolutely new games appear on the site daily!

the site always offers the widest selection of free online games. New games are added every day!

The RAINBOW LOOM set is a unique find for any child. This game is designed for weaving bracelets from rubber bands. It consists of many rubber bands of different colors, a machine and a hook. Thanks to multi-colored elastic bands, you can fantasize about each pattern, making it varied and unique.

RAINBOW LOOM gives each child the opportunity to develop by making a variety of bracelets, rings, elastic bands, brooches, phone pendants and much more, which is enough for the child’s imagination.

So, the RAINBOW LOOM kit consists of:

  • loom;
  • rubber bands 600 pieces;
  • crochet hook;
  • 25 clips for connecting finished bracelets;
  • instructions.

Before starting creative work, you must carefully read the instructions, which contain recommendations for use, as well as work plans. Initially, you need to help your child understand how to make products, after which he will be able to create unique things himself. First you need to learn how to do simple things, after which you can begin such complicated work as making animals, dresses and bags.

Making unique products will bring a lot of pleasure to your child. Using the diagrams, the child can complete the first works independently; this will help develop hand motor skills and understand the principle of weaving. Each time the child’s imagination will surprise with its ingenuity, thanks to which the manufactured items will delight with amazing style and original design.

The material from which RAINBOW LOOM elastic bands are made is absolutely safe. Do-it-yourself wicker products will allow a girl to feel like a real lady, because thanks to these products she will be able to determine her sense of style.

Such classes are suitable for girls no earlier than six years of age. Until the age of eight, your child will need your help to understand the weaving technique. By age eight, your child will have gained enough experience to complete tasks independently. With this set you can please your family and friends with original accessories made from rubber bands.

The most important thing for a child is to please you with his own achievements.

You can order the RAINBOW LOOM set on the website www.emarketsales.ru. The online store often holds promotions and gives its customers various gifts. By purchasing a RAINBOW LOOM set for your child, you will give him a lot of emotions and joy.

Weaving bracelets is a fun activity. There are many craftswomen who weave bracelets from cords, beads, and various threads. And today, rubber band bracelets are very popular among schoolchildren. I'll tell you how to weave a bracelet from rubber bands. Making a rainbow bracelet with your own hands is not difficult at all. You need a little patience, a special or regular fork, rubber bands of different colors and, of course, imagination.

Weaving from rubber bands was invented by an adult and engineer Chin Chong (USA). This man made a machine and a special hook so that his daughters could weave bracelets and other interesting crafts from bright rainbow rubber bands.

What is needed to weave such a wonderful bracelet? Firstly, you need rubber bands (it’s better if they are bright). Secondly, you will need a special fork (it often comes with rubber bands) and a hook (you can use a regular crochet hook No. 3 if you don’t have a special one).

Rubber bands for weaving bracelets and other crafts are sold in stationery stores and stalls with yarn and embroidery. There are simply countless colors of rubber bands (it’s not for nothing that they are called irises, like a real rainbow). There are simple one-color rubber bands, striped elastic bands, embossed rubber bands, etc. The diameter of one rubber band is approximately 1 cm. It is from these little ones that we will weave a bracelet.

We will talk about weaving a bracelet from rubber bands, but you should know that from these cute irises you can weave funny pendants and keychains, phone cases, handbags, rings and other jewelry.

There are many options for weaving rubber bands. There are very complex types of weaving that require a special plastic machine, and there are also simple weaving that only require your fingers.

The simplest bracelet made from rubber bands on your fingers

The simplest rubber band bracelet is woven on the fingers. It is also called chain bracelet.

Take rubber bands of 2 contrasting colors, for example red and green. Put a green rubber band on two fingers - index and middle, turning it over in a figure eight, as in the photo.

Now we put on the red rubber band and remove the bottom one again.

So we continue to weave, alternating the colors of the elastic bands. It turns out to be a chain of rubber bands.

You can make a chain bracelet using one color or randomly alternating different colors.

As soon as you have weaved a chain of the required length, remove the last elastic band and fix the bracelet by threading the ends into the S-shaped clasp.

This is the easiest way to weave a bracelet from rubber bands.

Fishtail rubber band bracelet

The second most difficult bracelet is the fish tail. It can also be woven on your fingers. This bracelet will look like a voluminous flagellum. For this bracelet you need to prepare about 50 rubber bands and a clasp.

Place the first rubber band on two fingers - middle and index, twisting it in a figure eight.

Remember, you only need to twist the first rubber band!

The second and third elastic bands are put on top without twisting.

Now remove the first elastic band from one finger and lower it on top of the two elastic bands.

We do the same with the second end of the elastic band on the second finger.

We put the elastic band back on.

We repeat the same thing with the bottom elastic band as described above - remove the ends from the fingers and throw them to the top.

So we weave the bracelet until it is the desired length (try it on the wrist).

When the weaving has reached the desired length, we transfer the elastic bands from 2 fingers to one, put on the S-shaped clasp and now our Fishtail is ready!

How to weave a French braid bracelet using a slingshot Video

Inside out fishtail bracelet

Here is another bracelet, similar to the previous one, but assembled a little differently. This bracelet is called Inside Out Fishtail.

  • If you need to pause and interrupt the weaving on your fingers, you can transfer the knitting to a regular fork or two pencils.
  • If you don’t have a clasp for a bracelet, you can get by with just one rubber band and tie it.
  • You can come up with your own weaving patterns by trying and experimenting.