Very often, visiting the stores, you can not decide on the size of your clothing. And all this is because brands of different countries use certain sizes. In order to understand everyone, you need to learn how to match all kinds of size to one, habitual for you.
There is also a moment that when buying, for example, pants, the size of yours is specified, and they are great, and even worse - small. That is why not refuse to help consultants and be sure to go to the fitting room, immediately with several sizes of trousers.

You will need:

Remove the Merki

• In order for the choice of trousers to be not so difficult to you, you will need to remove the standings from your waist.

Make measurement without clothes, tightly press the tape to your body, but do not squeeze, even if you like to see the smaller number. Focus on the measurement of the waist, which is located at a distance of two fingers above the navel.

• Do not forget that you also need to measure length, then the second digit will mean it.

Consider as well with which shoes you will wear these pants. Measure the length of the heel or platform, and only then remove the length if it is necessary.

• If you have a disproportionate figure, most often - wide hips, grab the measuring tape as well.

If you want to pick up pants or jeans that will make your shape, take it more seriously. Try to get the most clear and accurate result.

Santimeters in inches

Since all parameters are measured in inches, you will have to translate your indicator. Make it quite easily, you only need the number you saw on a centimeter multiplied by 0.39. In this case, the number you get, and will correspond to the size.

1. For example, your waist is 75 cm.
2. 75*0,39=29,25

if this is the number 30, the size you need will also correspond to this figure.

Size ratio

The American system involves the letter designation. The Latin letter W means the volume of the waist, and L is the length. As for the clothing of our production, everything is much simpler here - 38,40,42 and so on. In order to determine the amount of waist and hips with this figure, you must multiply the size of two and add four more centimeters. Each fashion designer, this figure can fluctuate for several units.

If you met in the store sizes 22,24,26, do not be scared, these are foreign tags. Knowing your size on the domestic system, it will be quite simple to determine. From the size known to you, take 16. That is, jeans with size 46 correspond to the size of 30.

Increasingly and more often, some manufacturers begin to produce clothing with labels, on which they indicate dimensions for residents of different countries.
There is another system of dimensions in American clothing: XS - if your hips are 86-88 centimeters, S - 88-94, M - 94-98, L - 98-102, XL - 102-104.

B Ryuki are an indispensable component of every man's wardrobe. Comfortable and correctly selected in size, they are able to make an image more solid and meaningful and add them to the owner of self-confidence.

But the models similar to the parameters can "sit" on the figure completely differently. That is why the most accurate and reliable way to choose the appropriate men's trousers It is fitting. But what to do, if it is impossible?

How to determine the size of men's trousers?

To learn size of men's trousersIf we talk about their classic option, you need to remove 3 major measurements, applying a new centimeter ribbon as thick as possible to the body:

• waist grumps - measured horizontally at the level of belt wearing;
• girth of the hips - determined by wrapped the tape around the buttocks, capturing the most convex part of them;
• the length of the pants on the inner seam is, it turns out if stretching the tape from the groin to the desired length of the product.

When buying a pants with the possibility of fitting, quite enough knowledge of the first two parameters, but when ordering them through the Internet, it is worth identifying the length of the inner seam, that is, in fact, the length of the leg. It is necessary not to make a mistake with the growth of the acquired thing, because very often in foreign stores the size of the trousers is also indicated, as on jeans - with the designation of the waist parameter and the length of the pants (for example, W36 L32). Read more about the size of men's jeans.

It is necessary to stand at the time of removing the standards evenly, in a natural position, without pulling the belly. However, not all measurements will be convenient to produce independently, so you can take your old classic pantswhich "sit" perfectly and determine the waist girth and the length of the step seam on them. When measuring the waist, you need to apply a centimeter tape to the belt of trousers from the edge to the edge (the button must be fastened) and the obtained value is multiplied by 2.

In order to correctly choose sports pants, the result obtained when measuring the waist girth The result is divided by 2 and add 6. If the waist is 88 cm, then 88/2 + 6 \u003d 50. This will be the desired size.

Table of sizes of men's trousers: We are looking for compliance

The results of the above measurements are correlated with Table of sizes of men's trousers. For example, the waist girth is 87, and the hips - 105, it means that the number "50" need to look for the label of domestic product.

An important parameter when buying Trousers for men is a growth value. Very often, domestic producers indicate it together with the main Russian male size - half-coupling the waist (more about it). It may look like this: 54/176. Especially thoroughly need to select pants to growth holders up to 170 cm and above 190 cm, otherwise the selected model may be too long or, on the contrary, too short, which will look at least, ridiculous.

You also offer a growth matching table (in a step of 4 centimeters).

Manufacturers male clothes (trousers, jeans, costumes, T-shirts, etc.), as a rule, do not adhere to a single numbering system and indicate the size in its own way. This is exactly what leads to a significant confusion when determining the exact parameters of the product, especially when making purchases via the Internet.

What is the size of male trousers to buy abroad?

Major brands of Europe and America are still trying not to move away from the dimensional grids adopted in these countries, which many of us are known.

If the selected model specified the European Pants size for men, I do not have to calculate anything and search in the table. This value is fully consistent with Russian, that is, our 52th is equal to their 52th, etc.

Frequently foreign pants manufacturers are used to number your products that is more characteristic of jeans. It is based on the same two parameters: waist pickup (W) and the length of the pants (L). But the complexity lies in the fact that these sizes are indicated in inches. In order to calculate the appropriately, just take 16 units from the domestic size known to you, and it turns out the number that should be signed on such pants. For example, in Russia, you carry the 56th size, it means that 56-16 \u003d 40 is the desired value (W40).

But if international marking is used on the product label, then on the contrary, without sizes Tables Trousers for Men not enough. With it, it can be easily determined that, for example, "domestic" 48 male size is denoted by the English letter "S".

How to choose the right trousers?

Models with cuffs are suitable for a high thin man - they will allow you to visually shorten legs. It is also desirable for small folds on the belt, which will add a little volume to silhouette. A dense full-length man is worth buying straightly wide pants without arrows and with a low waist.

Pockets of products should not be hurned, the only thing that is permissible to put in them is a wallet. And another advice: Length classic men's trousers It should be such that when walking there was no socks, the socks ended between the back and the beginning of the heel, and at the same time did not form a large amount of folds.

7 little-known facts from the history of clothing

1. The first people, in whose bypass appeared pants, Iranian Scythians are considered. And in ancient China, only soldiers wore this garment.
2. The leggings initially were part of the frontal uniform of the Prussian officers and sewed from the mole or deer. Councils also came from the form of European cavalrymen. And the one, and the other model was distinguished by an exclusively tight fit, which helped to increase comfort with a long riding riding.
3. Such objects of historical male wardrobe as Galifa and Pantalonians have a nominated origin: the first from the name of the French general, the second from the nickname of the comedic character of the Italian theater.
4. Until the end of the XVIII century, the aristocrats were not taken to wear long pants - a maximum of the knee, and the pants to the ankles were considered a uniform for workers (for example, chipper systems).
5. In Russia, European fashion on the lower part of the costume introduced Peter I in 1670. Until this time, the Russian men dressed in ports - two pieces of cloth, connected in a step of a rhombic winting.
6. From the end of the XIX century until the 1940s, men's pants were one universal girth in the belt and were adjusted on the figure using suspenders or belts, and therefore looked very baggy.
7. Modes of the 70s assured that the clams should necessarily have 5 folds at the bottom (as the Fleet's fleet says - by the number of oceans). In fact, it depended on human growth.

How to determine your size men's trousers

Pants - An important object in the wardrobe in a strong floor. Each man on the planet has a huge amount of trousers. They will be relevant at all times. Sew from different fabrics. There are straight and unfolded. But, modern guys left "Kleshi" far in the past. Now in fashion direct narrow or wide pants.

Classic with arrows make a male image solid, attach confidence. They are worn on business meetings, restaurants, serious events. More liberated personalities love pants free cut. And the youth is more inclined to a narrow, multicolored pants.

The colors of the pants is also diverse and cheerful. Young people are not against bright, wardrobe items.

To buy a trouser should treat seriously. The same models will look different on different figures. Therefore, it is better to remove measurements without mistaken and find out your size. Experts advise this before each purchase of pants. Since a person can lose weight or fully in a short time. And young guys can add growth.

To remove measurements for the purchase of trousers, you will need to learn growth, coverage of the waist and hollow. Growth is easy to measure yourself. You need to get up on a flat surface. Better on the floor without carpet. Take into the hands of a pencil.

To lean to a smooth wall tightly, do not slouch and do not pull out. It is normal, relaxed. Hand to find a place where the head ends. And make a mark on the wall. Not raising I. not lowering pencil. Then take a roulette or tape and stretch from the floor to the mark. It will be your height.

Measure the waist on the naked body or, being in lightweight. Attach the ribbon to the place on the body where you wear the belt. Do not draw and do not drank the stomach. It will be a line of waist men.

Beer girth is the most convex part in the buttocks. It is still required to find out the length of the pantian, along the inside of the leg. The tape is applied from the groin area to the ankle or hee. It depends on how long the trousers do you purchase. The length of the product is indicated by the manufacturer on the label.

We write the resulting results and compare with the table. For example, your waist coverage is 85 cm, it means that the size of Russia is 48. And the International M. The table shows the parameters from 40 to 64.

The development of online trading allows you to buy practically any clothes on the network today. Such a purchase is usually more profitable for the price and there are no problems with the assortment. But not everything is smooth in the Danish kingdom, there are problems and when buying in the online store. The main problem is difficulties with the selection of clothing size, in particular trousers, because it is impossible to measure them through the monitor.

It will help to correctly choose the labeling table of the sizes of men's trousers, which indicates:

1. Russian size,
2. Girth of waist and honey
3. Marking England, Italy, USA and Europe.

Dimensional table for men is a good help when buying, because with its help you can also reduce the acquisition of not your size to zero. The table is simple: take your waist girth and pick up the size of the trouser, taking into account the labeling of the country's clothing manufacturer. There is a second option - look at the size on old trousers and select the labeling of another manufacturer under it.

The Russian sizes go in numbers from 44 to 70, the labeling of England has the designation UK and the dimensional range of 32-62, and the amounts in the US are indicated by the US and are labeled 34-64. There are also international sizes, they are denoted by Roman numbers from XXS to 5xl. All this is perfectly visible in the sizes table.

We select the marking of trousers

For example, you wear pants with English labeling UK 36, but you want to buy italy's pants. In this case, Italian marking 46 will suit you, if the pants are made in the USA, then order the size of US 38. Everything is simple, because with the help of a table and matching labels you can easily pick up any sizes of men's pants.

It is somewhat more complicated to learn the marking of the pants if the size of the size of the sizes and Naid. In this case, you will have to take the measuring tape and measure your waist (preferably and girth bleeder). The waist is wrapped with a ribbon parallel to the floor, while the stomach should not be pulled out or pulling, and you can not drag too tightly.

Suppose your waist has girth 94 cm. We look into the table and see that Russian marking 52, UK 40, US 42 or International Standard L. corresponds to the clamp.

How to find out the size of the pants on the waist sorted out, it remains to decide on the trouser length, because the growth is different. Manufacturers point on pants the length of the pants, and not a human height, so it is necessary to measure old trousers in length or make the distance from the waist to the floor. The assistant will not be superfluous here if it is not, but I want to make a purchase right now, then act in the following way.

Take the roulette, at its beginning there is a bend that must be pressed the foot to the floor. After that, stretch the roulette to the belt and look at the length of the pants. This option will only fit in extreme cases, better so that a wife or comrade believes you, it's easier to accurately determine the exact markings of the trousers in length.