How to moisten newspaper tubes before weaving. How to make newspaper tubes correctly. Newspaper tubes. How to do it? Making tubes from newspapers. How to make tubes from newspapers for weaving

THE ABC'S OF WEAVING

DO YOU NOT HAVE PAPER WEAVING TECHNIQUES YET?

OR MAYBE YOU'RE HEARING IT FOR THE FIRST TIME?

YOU HAVE COME TO THE ADDRESS!

Stay on this page and you won't regret your time.

Having studied this small, collected from various sources Master Class You will master the technique EASILY AND QUICKLY paper weaving and you can safely move to a new, more complex and exciting level, weaving truly professional things.

Preparing the paper vine

First you need to prepare the material. It can be pure paper, but practice shows that weaving from it is quite difficult due to its density. Of course, if you have newsprint that is used in printing houses, then this will be an ideal option, since the absence of printed text on it makes painting the product much easier. But more on that later. So, prepare newspapers in large quantities. Using a sharp knife, cut strips no more than 10 centimeters wide. To begin with, you can practice on shorter strips and only after gaining some experience move on to longer ones. At the same time, it is much easier to make a product from long strips than from short ones.

Place a strip of paper in front of you. We apply a knitting needle to it at an acute angle. Next, we tuck a corner of the newspaper under the knitting needle and begin to twist the sheet as tightly as possible.

Don't be alarmed if one end ends up a little thicker than the other. This is normal, although there shouldn't be a big difference. To prevent our tube from unraveling, you should use glue and secure the corner of the sheet. Thus, you need to prepare at least 50 straws. The quantity depends on the size and complexity of the product.

Further actions depend on how exactly you are going to paint the finished product. You can paint the sticks before weaving. But there are some nuances here. The wrong varnish will make them hard and brittle, resulting in a rough looking vase or box. It is recommended to use acrylic varnish for artwork.

A basket made of tubes, on which the text is clearly visible, also looks beautiful. You can paint the product after manufacturing, especially if it is not of a particularly complex shape.

Making the bottom

The base of the product can be absolutely anything. First, let's try to make a vase with a solid bottom. To do this, just select a dense material, for example, cardboard, and cut two circles from it. Why two? And in order to hide the ends of the tubes in the bottom, which will be the stands. Next, we place one circle and, using a pencil, make marks where the posts will be fixed. If this is a future vase, then you can make the stands at a wide distance from each other. Some types of weaving, for example, oblique, allow you to weave on 5-6 stands. Glue the ends of the sticks and immediately apply the second circle. A solid square bottom is made in the same way. But still, the wicker bottom looks especially attractive. This is where the weaving of a basket or box most often begins. In this case, you need to cross several tubes, for example 5-7. Next, we take one tube and begin to braid it from the center in a circle, alternating the position of the main sticks either above or below the working one. We extend the tube as necessary. How to do this will be described in the next section. Thus, we create a circle of the required diameter. In order to understand how to weave a round bottom using other techniques, you only need to watch the video tutorial once.

Rarely, but still sometimes a square bottom is woven. This is a rather complicated process and you need to master it only after you have made a couple of products using a lighter technique.

Tube extensions and weaving

Some crafts, such as a vase, may be quite tall, requiring frequent extensions of the paper vine. To facilitate this process and to ensure that the finished product has the most attractive appearance, you should learn how to connect the tubes correctly. As already mentioned, the paper vine blank has ends of different thicknesses. This is what allows you to seamlessly connect them. We take a stick with a thin end and a second one with a thick one. Now we simply insert one into the other with gentle movements and scroll a little. To secure the joint, you can lubricate the thin end with glue. It is often recommended to cut off the thick end before connecting the vine. But at the same time, you will get a sharper transition, since the thickness of the wall of the stick will be much greater than if it was not cut. That is, in our case the transition will be smoother, and after painting it will become completely invisible.

Next, we will try to weave with the simplest weaving, that is, one strip. To do this, take our bottom and attach a stick near one of the posts. Before this, you need to choose the shape that you will braid. This can be a can, bottle or box, if the basket is being woven. We lift each end of the racks up and, if possible, secure them with clothespins. Next, we begin to braid our racks with a free vine. Alternatively, a basket is woven in the same way using two sticks. In the future, you can experiment and alternate weaving with one or two tubes.

The rope is more difficult to weave. In this case, two tubes are used. They are located on opposite sides of the rack and at the same time intertwined with each other in the space between the racks. But in the photo this weaving looks especially interesting, and a basket made using this technique is durable and holds its shape perfectly.

Almost all types of weaving are continuous, that is, each previous row flows into the next.

Some products have a lid. It weaves in exactly the same way, only with a lower height.

After the product is ready, it needs to be painted and, if desired, applied with a pattern. This can be painting, ribbons or decoupage. Each technique has a detailed manual that will allow you to master it. Next, the product is varnished.

What can be made from paper vine

At first glance, it seems that a limited number of products can be made from newspaper tubes. But as soon as you master this technique, and you no longer need instructions while working, you will be able to create your own weaving methods and, accordingly, new crafts. We can only give advice on how to weave this or that product. In order to create a basket, it is enough to weave the shape with classic weaving. Next, a pair of tubes are woven on both sides, on the basis of which a handle is woven. For practice, you can weave a laundry basket or a chest for sewing supplies.

The first one is larger, but the second one can have internal partitions. A vase is especially often woven from newspaper tubes. To create a unique image, you can make an openwork edge. To do this, you can simply weave a braid or master a more complex method of weaving an openwork, but for this you will need a diagram.

To decorate the room, pots made of tubes are used, as well as all kinds of glass holders, stands for pots and hot dishes. But that's not all. A paper bell, strollers, hearts and balls, photo frames and even animals and birds look great.

Once you look at an example of products made from newspaper tubes, you simply cannot ignore this technique and will definitely master it, creating many useful and beautiful things. Author: Sergey Batov

Master class on weaving from newspaper for beginners

We have been weaving from newspapers for a long time, putting them on display. And when they ask how to do it, we send them to other sites using links. When we were next weaving a pot for flowers, I decided that we should have our own master class on weaving baskets.

The sticks are twisted, then I connect them in two pieces so that they are immediately longer.

I roll them out with a rolling pin to make it easier to slide them under each other.

There must be an odd number of sticks.

I begin to braid with that stick, of which there are more in the row, we have 5 pieces.

Like this. Holding it with your hand and leveling it so that you gradually get a circle.

I also gradually level out the rays, like those of the sun.

The size of the circle must strictly correspond to the bottom of the shape that we will braid. Otherwise, there will either be a gap or an ugly transition.

Then I insert the form (I have a can of washing powder) and lift the sticks up, and so that it does not move, you need to put a weight inside (I have a pot of soil). I secure the sticks with an elastic band (I used to do it with tape) for it to be more convenient. I align all of them at the same distance. Yes, before that I build up all the sticks with denser and thicker sticks.

And I braid it. It’s better to choose a form that has a slight protrusion at the top, so that the sticks touch this protrusion and you can insert the sticks freely and quickly. (But this is for the first 5-7 rows) And then you can remove the elastic band.

This is what happened

We close the edges. Alternately, we bend the sticks one after another inward.

You can see it here.

Then, using a crochet or knitting needle, draw several rows from the inside and insert a stick behind them

Then cut off the excess.

To get curly braids, you need to alternate the shapes that we braid and also secure them with either an elastic band or tape.

Well, then we paint it at our own discretion. Whoever likes it.

When I was making MK, I thought, maybe I’m doing it in vain, why “reinvent the wheel”, so I omitted such details as making tubes and their size. I'm correcting myself now. My sheet size is half a magazine sheet.

Here you can see it with me. 27 cm by 9 cm. This sheet is from the World of Books catalogue. I have a lot of them. Sheets from the cover or inserts that are thicker go the same size onto the tubes, with which I extend the side tubes, which are tied vertically with an elastic band. That’s how I put it, it seems clear.

I twist on this knitting needle, size 1.5 mm (on which socks are knitted)

Torsion process.

Place a drop of PVA glue on the corner and roll it between your fingers.

Here on the white tubes you can see that the ends of the tube should not be the same (one is thinner, the other is thicker), so that it is convenient and quick to connect them. I drip 1-2 drops of glue into the thick end (it is better to have glue in a bottle with a tip) and I connect it to the thin end (there is no need to be sorry, push 3 cm or more and therefore you don’t have to wait for it to stick together, but continue to weave, the tube will not come off.

Here is the finished product, which was number 18.

In the comments, many write that the tubes are either very hard and do not bend, or soft and break. Therefore, I decided to add a photo on twisting the sticks. This picture shows how to twist correctly (at an angle of 45 degrees). Such a stick turns out to be both strong and flexible. And the ends are one narrow and the other wide.

This twist is also not correct. Low strength, breaks when stretched.

Now we have our own master class and we will not send beginners to other sites. It seems like I added the missing details. I paint with acrylic varnish, immediately colored in three layers. It doesn’t smell, you can paint it right on the kitchen table (covered with newspaper). I came across the colors (oak, maple, walnut, pine (the lightest), you can mix them. Some people paint first with water-based emulsion or acrylic paint so that the letters are invisible, but then with colorless varnish. But I like it so natural. Well, it seems like all the questions have been answered, you can weave to your health. And I’ll try to make a tutorial on weaving frames. Yes, more. I can see the edge processing at No. 13-14. What if figuratively with a rim, then the sticks are simply wound, leaving a loop, through two vertical sticks under the third down inside.

“Today we’ll talk about how to use an old newspaper. After all, many people don’t even know that newspaper makes very nice souvenirs in the form of vases and pots.

If this is your first time hearing about this, then I’ll tell you about weaving from newspaper tubes for beginners step by step.

In order to create a beautiful vase from newspaper vine, we will need the following tools:

1. stack of old newspapers,
2. bottle or jar,
3. PVA glue,
4. tassel,
5. knitting needle,
6. thick cardboard,
7. ruler,
8. acrylic paints (you can use one, for example, white),
9. scissors,
10. as well as a hot gun, but you can do without it.

During the work we will use the technique of simple weaving from newspaper tubes - “rope” .

We take a ruler and use it to divide the newspaper spreads into long strips, each of which should be about 10 centimeters wide.
Now take a knitting needle (you can also use wire).

We begin to wrap our strips around the knitting needle, while the knitting needle should lie slightly obliquely relative to the paper.
The remaining edge of the newspaper needs to be coated with glue and fixed. We'll get a tube. About thirty of these tubes need to be made - they will be the material for weaving our product.

After all the tubes are ready, take a bottle or jar of the desired size (this is at your discretion) and place it on the cardboard. We trace the bottom with a pencil and cut out two identical circles.

Now you need to prepare the tubes for the frame. To do this, one end of the tube needs to be slightly flattened (about 3 centimeters from the edge).

Now you need to apply glue to one of the cardboard circles and glue newspaper tubes to it with flattened edges. The newspaper vines need to be distributed so that they are at the same distance from each other. To do this, you can make approximate measurements in advance and mark them with a pencil on cardboard. Glue can be applied to cardboard using a hot gun. If there is none, then we coat the bottom with regular PVA and use a press.

The glued newspaper rod needs to be lifted up and secured with an elastic band. Now we have the base for weaving ready.

Now you need to take one newspaper tube, flatten its end, fit it to the bottom first, and then glue it.

We will place this tube behind the nearby frame tube on the right side; it should wrap around the outside of the frame tube.

Now we will alternate - we will clasp the frame tubes from the outside, then from the inside, and thus complete the first row.

If you run out of vines for weaving, you need to attach another prepared one to it. This is done simply - insert another into one newspaper vine (the one that ends) (as if we were screwing it in).

Attention, when we start weaving the second row, you need to insert a jar or bottle (what you took as a basis) and continue weaving.

Thus, we must weave all the rows. That is, we weave until we get the required height.

After the last row is woven, you need to cut the edge of the newspaper tube obliquely and bring it inside the basket to the limit.

The edge of the newspaper tube must be fixed with glue.

The first frame tube on the right side needs to be cut off, but at the same time leave a tail (3-4 centimeters), spread it with glue and bring it inside the braid.

We also cut the second tube, which is on the frame, coat it with glue and tuck it inside.

Next we decorate the basket. To do this, you need to apply acrylic paint to the inside of the basket with a brush, then paint the outside part. Let's wait until the paint dries a little and paint the product a second time.

The bottom of the basket can be painted three times and allowed to dry.

The decorative basket is ready!

Now you know how to weave newspaper tubes for beginners and can safely start making similar decorative items. For example, you can weave a vase, pot or bottle mold, which will add a little variety to your interior.

Weaving baskets from newspapers. Final master class.

We cut the working tubes diagonally and grease them with glue.

We secure it with a clothespin for better fixation; you can place polished cardboard between the tubes and the clothespin so that there is no trace of the clothespin left.

Finishing the edge, the easiest way.

We bend the vertical post towards the next one, make the second bend so that the distance between the folds is equal to the distance between adjacent posts.

We cut the rest of the stand diagonally, grease the cut end with glue and insert it using a knitting needle next to the next stand. We continue to perform in a circle.

It is difficult to imagine an interior in a country or ecological style without a wicker item. But where is the vine, and where are we, residents of megacities? Fortunately for the townspeople, designer Peter Clarke figured out how to weave from newspaper tubes everything that is woven from wicker and straw.

Weaving newspaper tubes for beginners is not difficult. You will not need any expensive materials or special tools, and you will develop your weaving skills very quickly. You just have to start, and very soon you can become the owner of an elegant coffee table woven from newspapers.

How to roll tubes from newspapers?

In order to twist the tubes, you will need:

• PVA glue.

The newspaper sheet needs to be cut lengthwise into 4 parts. Take 1 strip, lightly wet your finger in glue and Start rolling from the corner at an angle of approximately 30° in relation to the long side of the strip. Each braider weaves differently. Some roll the tubes like rolled-up cigarettes - on the air, others roll them away from themselves on a smooth table surface. Many craftsmen twist tubes on knitting needles. Find the method that is most convenient for you. Glue the end of the finished tube with PVA.

What should the tubes look like?

For beginners, weaving newspaper tubes may seem difficult, because the tubes do not immediately turn out smooth and uniform. Don't be upset if the tube widens towards the end. It is even more convenient to weave with such tubes, and they are easy to extend by inserting one into the other. Evenly twisted tubes are needed only for small panels and frames.

How to paint tubes?

Before weaving newspaper The tubes can be painted with wood stain or food coloring. It is necessary to dry by laying the tubes on a flat surface. It is better to paint the finished product with paints that are not completely absorbed into the paper, otherwise it will crumble when weaving.

Weaving from newspaper tubes for beginners

To understand how to weave from newspaper tubes, try starting with a tray, vase or box. To avoid the hassle of weaving the bottom, take a sheet of thick cardboard and cut out 2 bottoms to the desired shape. On one bottom in a circle at a distance of 2-3 cm, glue the base tubes, like diverging rays. Glue the second bottom on top.

When the glue dries, bend the base tubes upward. Place the working tube across, sometimes behind, sometimes in front of the base tubes. Continue until you are happy with the height of the side.

You can try making “windows” like handles. It is not difficult.

Tuck the ends of the base tubes inside the weaving. This is enough to finish it, but if you want, you can also weave a braid from newspaper tubes to decorate the sides of the basket.

You can glue the braid and cover the joint with a strip of newsprint. The finished product must be thickly coated with PVA glue and let it dry. Be careful; when wet, the product softens and may warp. To give greater strength, repeat this treatment several times. A completely dry product can be painted and varnished.

If you are a beginner, first learn how to twist straws well and try to do something very simple - for example, a vase decorated with such tubes from magazines.

Weaving from wicker, straw and other plant fibers is a fascinating activity, but ordinary newspaper tubes can be a modern alternative. After all, natural materials are quite capricious; a lot of effort must be spent on their proper preparation, which is very problematic in an apartment.

Therefore, paper wicker weaving is rapidly gaining popularity. This hobby requires minimal investment, and the products are very beautiful and durable. In addition, you can easily get rid of piles of accumulated newspapers and magazines, turning them into hand-made masterpieces and delighting your friends with unusual gifts.

In this article we will reveal all the secrets: how to make newspaper tubes and color them, how to properly prepare a man-made paper vine for weaving and other little tricks so that your crafts are impeccable.

What to make paper vine from

If you decide to turn mountains of waste paper into elegant baskets and flowerpots, we support your desire to make this world a better place and will help you choose the right material for making paper vines.

Newspapers

We recommend starting your acquaintance with the fashion hobby with straws from newspapers. Firstly, this is the cheapest, or rather even free, consumable material. Secondly, they are soft and obedient. Newspaper pages are easy to roll into a neat tube; even an absolute beginner can handle this task.

Consumer paper 45-48 g/m2

If you have not found any deposits of unnecessary newspapers, visit the nearest stationery store and purchase a couple of packs of consumer paper. It can also be found under the names offset or newspaper.
This category of raw materials also includes fax paper. Its density will also allow you to prepare tubes without problems.

Glossy magazines

If you have accumulated a whole collection of glossy magazines that you can’t bear to throw away, then donate it to a good cause. Magazine pages, all kinds of flyers and even leaflets are also suitable for rolling tubes. But we want to warn you right away: products made from them turn out to be rough. In addition, dense, glossy wicker is more difficult to paint than paper.

Therefore, such rigid tubes are most often used to create frames for large products, frames, finishing mirrors and shelves. That is, everything that requires additional strength and rigidity of the structure.

Office paper

This is the most unsuitable material due to its rather high density (A4/A3 office paper has a density of 80 g/m2). The tubes made from it are too dense and unyielding. Using office paper of any format, you will encounter difficulties already at the preparation stage: rolling it into a tube will take much longer than when using other types of raw materials. And the most important thing: the finished vine will turn out to be too rigid, it will be difficult to fit it into the weave, and twists and creases will be noticeable in the finished product.

Having analyzed all of the above, we can highlight our favorites. They lead by a large margin in terms of the number of advantages. newspapers and newsprint (aka consumer) paper with a density of 45–48 g/m². It is this raw material that we recommend using for preparing paper vines.

How to twist paper straws

It's time to move from theory to practice and learn how to properly and quickly twist tubes from newspapers. At first, this may seem like something incredibly complicated. But in this matter the main thing is to start and get used to it. A little training - and you will see that the spell that prevented your fingers from obeying has dissipated and the tubes will begin to appear almost on their own.

To work you will need:
The thinner the base (knitting needle), the higher quality raw materials you can produce for your masterpieces. Therefore, immediately strive for the ideal and try to gradually accustom yourself to rolling the thinnest, dense tubes possible.

We are preparing a newspaper

They are distinguished by the presence or absence of a pure white edge. Tubes rolled from strips with a clean newspaper edge will be white and without letters. Products from the remaining bands will have typographic fonts or designs.

To weave medium-sized products, you will need to use a knitting needle 1 mm or 1.5 mm thick and strips 7-10 cm wide. Remember, the lower the paper density, the wider the strip should be for twisting the tube.

Develop your own experience and experiment with the thickness of the workpieces that is convenient for you. In the meantime, we recommend that for medium-sized crafts, when using a 1-1.5 mm knitting needle, take strips of newsprint 7-8 cm wide, and for massive products increase the width of the strips to 10 cm.

We do not recommend twisting long tubes to a full spread of a newspaper sheet, since with such a strip length the tube does not turn out even. This leads to problems with extensions and, ultimately, with the appearance of the product. So, for beginners, we recommend that you avoid long tubes longer than 40 cm and instead twist tubes from strips 30 cm long; as a result, you will no longer have problems with extensions and the appearance of the product will undoubtedly improve.

The main secret to successfully preparing paper is to cut it along the grain.

When cutting the first strips, beginners often notice that in one direction everything goes like clockwork, but in the other it is much more difficult to cut, and the cut turns out to be “shaggy”. Similar difficulties can be encountered when twisting the vine.

These apparent anomalies are related to the direction of the cellulose fibers in the sheet of paper. That is, before cutting, you need to determine their location.

Method No. 1

Tear the newspaper in different directions (vertically and horizontally). The tear along the fiber will be smooth and straight, its edges will be less shaggy. Accordingly, breaks across the fibers will be uneven. For this method of testing, the familiar but slightly modified rule from childhood is suitable: tear seven times - cut once.

Method No. 2

Fold a sheet of paper in two perpendicular directions and smooth the folds with your fingers. The fold running along the fibers will be smooth and even to the touch, while the fold that runs across will be rough and slightly broken.

From all of the above, let us formulate a simple but very important rule: always cut strips for tubes along the paper fibers.

Spin it on a knitting needle

Now it's time to learn how to properly twist your first newspaper tubes for weaving. Be patient and look at the step-by-step photos, everything is much simpler than it seems at first glance, just don’t forget to strictly follow our instructions.

Advice: It will not be very convenient to twist on a bare table, since the paper on a smooth surface slides and does not adhere well to the knitting needle. We recommend rolling it on a silicone baking mat; these are sold in hardware stores, Ikea, and Fix Price.

It is desirable that the surface be slightly rubberized, then the grip will be very good, the knitting needle will not fidget and the tube will be wound more tightly. Be sure to pay attention to this important nuance!

Some craftswomen advise using a piece of vinyl wallpaper instead of expensive rugs. Vinyl also gives excellent grip and is a budget option.

Experiment with the choice of bedding and rugs, only then will you understand what will be more convenient for you to do this on.

Let's summarize. Parameters of an ideal straw:

• equal width along the entire length;
• consists of parallel turns;
• tight, dense and does not unwind;
• without a large cavity in the middle.

The first tube turned out to be far from ideal, and the process of twisting it seems too labor-intensive? Do not despair! Show patience and perseverance, do not chase speed and quantity, accustom yourself to the idea that the main thing is the quality of your paper vine. Experienced craftswomen wind more than two hundred tubes in an hour, while watching their favorite TV shows. So everything is in your hands - literally and figuratively.

We paint newspaper tubes

Newspaper weaving gurus recommend using it for work already painted vine. Do not paint the finished product after weaving. As a rule, products with complex shapes are difficult to paint completely, and gaps look untidy and spoil the overall impression.

Therefore, the next thing you have to learn is how to paint paper tubes for weaving. They can be painted in a variety of ways and substances.

Advice: if you have tubes made from newspaper, then it is advisable to sort those with prints separately, white ones - separately, with letters - separately. This will be more convenient when painting.

stain

For our purposes, you can use either water-based or alcohol-based wood stain. Non-aqueous stain has a pungent odor; you need to work with it in a well-ventilated area, ideally on a balcony or outside.

Water-based stain is more pleasant to work with: there is no smell, the tone goes on more evenly, although it takes a little longer to dry.

Using water-based stain, you can:

• paint undiluted or dilute it with water, achieving the desired shade;
• add varnish (colorless acrylic water-based), construction primer or special dyes (colors) to it.

Approximate proportions for the composition of stain-varnish-water:
For 0.5 liters of diluted stain, add 4-8 tbsp. varnish Its exact amount depends on the thickness of the varnish itself.

Paint paper tubes with this mixture (by bathing/dipping in the solution, or by brushing). Immediately after this, place them on a wire rack or on an upside-down shoebox lid and blow a little with a hairdryer to prevent them from sticking together. Leave them to dry until desired softness. Store them in a plastic bag with the ends closed.

Already painted tubes can still be treated with Dufa impregnation diluted with water after they have completely dried. After this, you need to dry them with a hairdryer and put them in a bag, leaving the ends open. This allows you to get an elastic, obedient vine. And dry ends will ensure trouble-free extension of the tubes.

Weaving artist Lada Ligai conducted an experiment with water stains of different colors, see what results certain colors give on the tubes (we would like to note that stains from different companies may give slightly different final shades).

Experiment with mixing stains of two different colors:

Painting with colors

This coloring method allows you to experiment with shades to your heart's content: you can get a bright fuchsia color, rich brown, natural straw or noble coffee color. It all depends on the assortment of the hardware store closest to you.

Rich colors you get by mixing color, water and construction primer (or varnish).

Pastel shades are obtained by combining the color with water and acrylic white enamel.

When painting with colors, be sure to use color fixatives (varnish, enamel, primer). because without this, the pipes may stain your hands.

For bright color, choose a primer or varnish, and don't use enamel! Another important point: the color must be added to the enamel or varnish and mixed thoroughly. Only then can the mixture be diluted warm water. Otherwise, the color will not dissolve in water and you will get spotted tubes (speckled).

If you decide on this method of coloring, pay attention to the following brands of colors: Tex, Palizh, Lakra, PROFICOLOR, Sniezka COLOREX, Dufa, TICIANA, Oreol, AlinaEX, Expert, EKOTERRA.

Approximate recipes for coloring compositions with colors:

1. 0.5 l of water, 1-2 tbsp. coloring, 1 tbsp. acrylic varnish;
2. another option: 100 ml water, 2 tbsp. white acrylic enamel, 0.5-1 tbsp. color scheme;
3. 0.5 liters of water or water-based stain, 150 ml of acrylic varnish, color until the desired shade is obtained.

The third painting method allows the twist to completely stick together. To prevent the tubes from sticking together, you can dry them with a hairdryer (and you don’t need to treat the tubes with anything else before weaving).

Before weaving, the only thing left to do is to moisten the vine further. To do this, dip it under warm running water for 15-20 seconds, put it in a bag with the ends facing out and put it on the battery for several hours.

There is simply no single correct advice on what is the best way to paint newspaper tubes. Don't be afraid to experiment and find your own composition. And to make your search successful, we offer you an interesting video tutorial on painting from Alena Bugrova.

Paint it white

Perfect whiteness can be achieved in this way. You need to prepare the paint: mix 0.5 liters of water with 2 tbsp. white acrylic enamel and 2 tbsp. varnish or primer, add another 100 ml of hot water. It is better to paint the tubes with a brush in a deep tray or baking tray, 40-50 pieces at a time. Place them on thick cardboard or upside down shoe boxes and remember to stir them occasionally to prevent them from sticking to each other.

After 15 minutes, repeat the procedure. If you paint in advance and are preparing for future use, then let the vine dry completely. And before work, just moisten it with water and leave it in the bag overnight. In the morning you can weave.

Then the woven white finished product is primed with varnish with the addition of water and acrylic white enamel (1-2 spoons per 0.5 liter of diluted varnish). It is also worth pouring 1-2 tbsp into the final layer of varnish. enamels. With this method, you will receive a product whose dazzling whiteness will be timeless.

Paint it deep black

This is the best way to paint the vine without showing the letters. Water stain ebony and black color will give it a rich black color. Next is the already familiar scheme: water, varnish, acrylic enamel.

To consolidate the theory, we offer another video that reveals in detail all the secrets of how to paint newspaper tubes for weaving.

Processing the tubes before weaving. Plastic tubes

For a neat appearance of the finished product, it is important to use well-dried tubes. This will allow the twist to stick securely and make it invisible in the weave.

The tubes that will go to the racks must be left dry. We moisten the rest before weaving to make them pliable and flexible.

In our next article, read simple weaving patterns and types of bends.

We prime and varnish the finished product

Priming is an important stage in working on a wicker product. It helps strengthen it, gives it extra strength and reduces the number of finishing coats of varnish. In this case, you can use either PVA glue or acrylic varnish.

To obtain a primer, each of them is diluted with water in a ratio of 1 to 1. But priming with varnish is more preferable, as it helps prevent the product from yellowing over time, which can occur when using PVA glue.

For the finishing coat of wicker crafts, we recommend using acrylic varnish. It is considered the most harmless, has no pungent odor and can be used in a residential area.

If your product will be used in conditions of high humidity, it is better to coat it with parquet varnish or varnish for baths and saunas. This will create a protective film - and the creation of your hands will delight you for years.

Remember, alkyd varnishes cannot be used for our purposes!

Please note that varnishes can have different effects. You can choose matte, glossy, super-glossy, silky matte, etc. Be guided by your vision and sense of beauty.

Varnish, which includes wax, allows you to maintain residual flexibility of products. But it is absolutely not suitable for impregnating tubes before weaving, since it does not glue the twist well. It will not be possible to achieve the effect of “plasticine” tubes.

We tried to cover in as much detail as possible all the nuances of working on newspaper tubes, and most importantly, we paid attention to how important it is to process the tubes before weaving. Now you have to gain experience on your own, because every little thing can affect the final result. With a little practice, you will be able to create wicker masterpieces with your own hands, as if straight out of a picture, which you could not even think of before.

Liked? Tell your friends:

You may also like...

In fact, absolutely any material that is sufficiently flexible is suitable for weaving, but since we are now talking about weaving from paper, we will learn how to make a vine from paper.

The wicker (weaving material) for paper weaving is made in the form of tubes or strips.

What paper is suitable for weaving?

Any paper is suitable for weaving. Almost all craftswomen who weave their paper products use newspapers and magazines for this.

Coloring using water stain as an example

What is the most powerful dome you can build from newspaper? A geodesic dome is a dome formed by the union of triangles. You can build a giant geodesic dome out of newspaper. First, gather friends or family members to help you.

Markers, glitter, beads and glue for decoration. Make a Prediction Predict how many magazines you think your newspaper dome will be able to support. Place three flat sheets of newspaper together. Starting at one corner, roll the sheets together as tightly as you can to form a tube. When you reach the other corner, fill the tube to prevent it from unraveling. Repeat until you have 65 tubes. Use this tube as a model to create 34 more lengths. Be sure to clearly mark all long points, such as with colored tape, so that you can distinguish them from the shorts.

This is truly amazing. After all, over time, a huge number of old newspapers and magazines accumulate in many homes. And giving them a second life is not only about bringing significant savings and creating beautiful things from nothing , but it's also a significant environmental gesture that goes some way to justifying the use of trees to make paper.

Decorate the pipes if you wish. Use this pipe as a model to create 29 more shorts. First, 10 strips of tape are pulled together to make the base of the dome. There is a long and a short tape for each joint. Arrange them so that there are two long points between them, and then two short points, etc. As shown. Place the tops of two adjacent shorts together to make a triangle. The tape is the next two long ones together, and so on all the way. Connect the vertices of these new triangles to a row of shorts.

At each joint where the four shorts are gathered, write another short strand up. Connect this short knuckle on both sides with the long ones, forming new triangles. Connect the vertices of these new triangles. with a range of lengths. Finally, add the last five shorts so that they meet at one point in the center of the canopy. To test the strength of your canopy, see how many magazines you can load on top. Explain how strong your canopy is? What was the most difficult part of creating the dome?

However, I personally do not use newspapers or magazines for weaving. Firstly, because I don’t write them out, and secondly, the printing ink used for newspaper printing is very toxic.

If you start using newspapers or old books for weaving, be sure to follow the necessary safety precautions: firstly, do not eat anything during this activity, and secondly, do not forget to wash your hands well often.

Build on it. How could you make your canopy stronger without interrupting the space underneath? Make a prediction and test it. Watching a homemade volcano erupt is a very interesting experience for young children as they watch and learn about the amazing power of these geological formations.

Making your own homemade volcano is really simple and requires basic materials that you can find around the house. Recently after reading a science fiction book about volcanoes and earthquakes, it sparked an interest, especially in Miss 4 volcanoes, and a number of questions and some misconceptions arose, so we researched these further and then made our own homemade volcano.

So let's get started.

1. To work, we will need sheets of paper, a sharp knife, a knitting needle or any other round and long object similar to it, and simple stationery glue or a glue stick.

2. First you need to cut the paper into strips. This is best done with a sharp knife, as shown in the photo.

To make lava imitate a real volcano, you will need bicarbonate of soda, red and yellow food coloring, and white vinegar.

We also folded a small amount of newspaper into the opening of the bottle, but made sure there was enough room to add our bicarbonate of soda and vinegar later. Keep some old flannels or fabrics for children to dry their hands with.

Once the Paper Mash was dry, Misses 4 and 5 began working to draw a volcano. While we were waiting for the paint to dry, we did the usual test to see how much bicarbonate of soda and vinegar we would need for our indoor volcano.

The optimal width of the strip is 7-12 cm. The length depends on how long your sheet of paper is. The longer it is, the longer the tubes are, and the less often they have to be extended.

However, one must not overdo it here. The strips should twist easily. Strips that are too long may be difficult to twist.

I think you will adapt to a length that is comfortable for you after some practice.

To give you a little idea, we used 4 tablespoons of bicarbonate of soda and 1 cup of vinegar mixed with red and yellow food coloring and it seemed to work great.

Miss 5 stood ready to grab it after Miss 4 poured it in the vinegar.

Our homemade volcano rises and foams as the bicarbonate of soda and vinegar react together. Making a homemade volcano is a fun and easy process that children will feel a sense of pride, ownership and accomplishment in what they have achieved. All this while learning new things and practicing some basic skills with an almighty eruption at the end. We repeated the eruption 3 times!

4. Make sure that the paper strip is wound neatly and tightly until the entire strip is wound onto the knitting needle.

Some simple facts about volcanoes

Volcanoes grow larger each time lava cools and creates a new layer of rock. Volcanoes can erupt underwater and form new islands of cooled lava. Volcanoes can be found on the Moon and other planets. There are more than 500 active volcanoes on Earth.

• A volcano is a mountain that erupts.
• The rock beneath the earth's surface is so hot that it melts.
• This molten rock is called magma.
• The erupting magma is called lava.

Paper is a versatile material that you can use to make many different crafts.

5. When a small corner of the strip remains, grease it with glue and glue it well to the resulting tube.

It is best to use office glue, since a glue stick does not glue very reliably and gets your hands and the tube very dirty. However, in this case, my paper was too thin, and it was more convenient to glue with a glue stick.

If you have a lot of newspapers and magazines, don’t rush to throw them away. You can easily make some useful things from paper. Watches with batteries. . Fold the paper tube and fold it in half. Then secure the threads with all 24 paper tubes. All that remains is to fix the clock mechanism, and our original wall clock is ready!

DIY newspaper crafts: “Butterfly”

Newspaper or magazine; Butterfly stencil; Double-sided foam adhesive tape; cardboard; Frame; Metered cardboard. Prepare a stencil and use it to draw butterflies on different sheets of magazine or newspaper. You can draw a butterfly on one sheet, fold several sheets together and cut out several butterflies.

8. It is best to store straws in a vertical, high container. This way they do not become deformed and are easier to use during work.

Helpful Tips:

1. When preparing tubes, you should also know that the thinner and softer the paper and the thinner the tube itself, the neater the finished product will look, the more complex and miniature its configuration can be.

What can be made from newspaper tubes?

Once you cut the paper butterflies, carefully lay them on a flat surface. You can arrange them according to color and size. Use double-sided foam tape to attach each shape. May slightly bend the butterfly's wings. Also, try making several layers of double glue - the butterflies will “fly” at different levels. Now you can glue the butterflies onto the main board.

All that remains is to insert the cardboard into the frame. Newspapers or magazines Scissors. . Each rectangle is folded in half and unfolded. On the left and right, connect the ends to the fold line. Again, fold in half to create a long, thin strip. Fold the strip in half and straighten it.

2. If you are dealing with thick paper, then it is better to make the width of the strips for the tubes no wider than 3-4 cm. Then the tubes will be more flexible and will be convenient to work with.

3. If your strips of paper are short, it doesn’t matter; the tubes are very easy to extend as you work.

4. When you start twisting the tube, make sure that the angle between the knitting needle and the strip of paper is as small as possible (step 3), then the tubes will be longer and more flexible.

Fold the left and right halves in half so that they meet on the fold line. This rectangle is the base part of the bracelet. To start folding the bracelet, you need to connect all the pieces. Insert one piece into another to create a chain of 27 links.

Newspaper Crafts for Beginners: Newspaper Vase and Stand

Glue; Scissors; Newspapers or magazines. . Cut each sheet of newsprint and magazine paper into 4 vertical strips as shown below. Each strip is folded in half and secured with glue. Now fold the strip in half and glue it again. After a few strokes, apply a drop of glue.

How to paint tubes?

There are different methods for this.

Some people do not paint the tubes, but paint the finished product. Others, on the contrary, believe that it is much more convenient to use already painted tubes. Apparently, here you just need to adapt and choose what is more convenient for you.

If you use newspapers or old books, then you will have to paint the tubes or the product. I prefer to make tubes from colored paper, which is not difficult to buy, or to color a finished product.

Making tubes from newspapers

To make the base of the vase, we must twist several small spirals and one large one. Glue several strips together to create one long strip, which you then need to twist into a larger spiral. If your base isn't big enough, just stick to it as many stripes as you can and add them to the spiral.

Decorate your suitcase with newspapers and magazines

Start all the little spirals as you assemble the vase. You can also make coasters for cups from paper spirals. Cut out your favorite image from magazines. Apply glue to the suitcase and carefully place it on top of the magazine excerpts. Apply glue again to the glued pages.

Since things woven from paper are usually designed to imitate weaving from twigs, in order to achieve the desired effect, the tubes are most often painted with various stains for tinting wood, which are sold in hardware and construction stores.

If you need to achieve a certain effect, coloring pigments and colors are added to the stain.

Souvenir from newspapers: bouquet of roses

Use scissors or a knife to cut out additional pieces to keep everything smooth. Newspaper; Scissors; Glue gun; Flower wire; Ribbon. . A circle about 4 inches in diameter was cut out of a newspaper page. Made from a round spiral about 1 inch wide. At the outer end of the spiral, begin twisting the paper until you reach the center.

Loosen the spiral to make our flower bloom. Attach the flower using hot glue. Prepare the flower wire, bend one end and attach it to the flower. The end of the wire can be covered with a piece of newspaper. Make several flowers to create a lush bouquet.

The tubes can also be painted with food or aniline dyes, acrylic paints.

How to carry out this process can be easily found on the Internet. There are many master classes and recipes on this topic.

Source in the photo.

Weaving from paper is a fascinating creative process, during which the most beautiful products are created, which, with high-quality processing, look almost indistinguishable from weaving from natural wicker. Various boxes, baskets, vases, stands, trays, rugs and many more elegant little things can be made from ordinary paper tubes with your own hands. From this master class you will learn how to prepare paper tubes for work, how to make them more flexible and durable, and we will also weave paper tubes!

If you have never been interested in weaving paper tubes, this article will be very useful for you.

Preparation of material

The first thing you need to make any wicker item is a large amount of paper. Newsprint works great; it's not too thick and easily curls and sticks together. Magazine pages are also suitable for rolling tubes, although they are not as convenient for painting.

Let's start preparing the paper vine for weaving. To do this you need the following tools:

• knitting needle 1.5 mm in diameter or wooden skewer;
• office glue;
• brush;
• pencil;
• ruler;
• sharp knife or scissors.

Making paper tubes

A paper tube is made by twisting a strip of newsprint onto a knitting needle or similar. The tubes flattened like a ribbon are called papervine. It is a little easier to weave from it than from ordinary tubes, but the products are not as neat and airy.

Using a pencil, ruler and scissors, divide the sheets of paper into strips 9 cm wide. First cut the double pages of newspapers in half. When the strips are ready, roll them into tubes using a knitting needle. Attach it to the edge of the strip at an angle of 45-60 degrees and roll the strip of newsprint.

Little tricks

The quality of the tube depends on the angle of the knitting needle. The larger it is, the longer and more flexible the tube will be. Tubes rolled at a smaller angle will be more rigid and durable. They are suitable for weaving frames and supports, and the longer ones are suitable for walls and patterns. You should not make too large or small angles, otherwise the tubes will be completely inconvenient to use.

When rolling, apply a little glue to the corner of the newspaper - this will help fix the tube and prevent the material from unwinding. The width of the tube tips should vary slightly. Due to this, you can easily extend the tube if it runs out at the wrong time.

Weaving a wall panel

The panel is a very simple craft, suitable for beginners. Despite the ease of assembly, with the right selection of colors, such a product will become an effective decoration for the interior of your home.

Paint the paper tubes in advance with acrylic paints in two harmoniously combined colors. Instead of acrylic, stain or food coloring is suitable.

Twist several identical tubes into a tape measure, coating the layers well with PVA glue. Secure the tape measure with a rubber band and let it dry.

Then add more colorful tubes in random order. Make several wide rings from rolled up tubes, and fasten them together by stitching them with a strong nylon thread and a thick needle. Threads will also help to hang the panel on the wall.

Vase made of paper tubes

Weaving a vase is not so different from weaving baskets from wicker. Let's figure out step by step how to make a wicker vase out of paper.

Roll up many newspaper tubes of approximately the same length. Place three pieces together, crossing them in the middle. Bend another tube in half and braid it around the rest, as shown in the photo. Following the spiral and adding a working tube, weave the bottom of the vase. Finally, tuck one end of the tube between the rows by pushing it in with a screwdriver or other flat-tipped tool.

How to make the walls of a vase

Extend the other end with a new tube. The walls of the vase are made using the oblique weaving technique. Bend the working tube and place it on the adjacent part of the frame. Then bend this part, clasping the upper tube. So, gradually increasing all the tubes, weave fairly high walls of the vase, tapering upward. To narrow it, move the tubes towards the center.

When completing the weaving, hide the ends of the tubes, wrapping them around the adjacent ones. The finished vase can be painted with stain, acrylic, or simply varnished.

You will find a few more weaving lessons presented in video format below. They discuss in detail the process of making crafts from paper tubes, which will undoubtedly be useful to beginners in this field of creativity.

Man tends to decorate the space in which he lives. In every house, sooner or later, you find a stack of old newspapers that you won’t go to recycle, and it’s a pity to throw them away, just in case they come in handy. A great way out is to make tubes from newspapers, which are great for weaving, which can then be magically turned into a beautiful product, for example, a basket, vase or anything else.

First you need to make the tubes themselves, so that you can weave them later.

Learn how to make tubes from newspapers for weaving with your own hands

The first thing that a person ignorant of this matter will think is that newspaper tubes are very fragile, but this is not the case. In this master class you will see for yourself how well you can work with this material.

Ingredients:

• Many newspapers
• Scissors or utility knife
• PVA glue
• Knitting needle/Sushi stick/Wooden skewer or similar

Instructions:

1. Take a newspaper.
2. Cut it so that you get A3 sheets (the size of a workbook).
3. Fold the resulting sheets in half again and cut.
4. It is better to do this in several sheets rather than in a pack, as you will waste energy ineffectively and get a crooked result.
5. Place your Ingredient No. 4, for example, a knitting needle, diagonally on the resulting cut sheet.
6. Start winding it so that you end up with the lightest tube possible, this will make it easier for you to paint it.
7. Screw tightly.
8. Apply glue to the edge of the newspaper and twist until the end. Wait a little for the glue to dry.
9. We take out the knitting needle.

If you succeed, you will notice that one side of the tube is thicker than the other, this is how it should be.

Below is a video of a master class on winding such newspaper tubes.

Builds up tubes.

Extending tubes from newspapers is necessary for further weaving.

To add extensions to the edge with a larger diameter hole, you need to add PVA glue.

It's simple!

To prevent the tubes from breaking after splicing, you can press them with your hands.

Now they have become even more similar to basket weaving material.

Painting tubes from newspapers.

You can cover newspaper tubes with stain or acrylic paints before painting.

Since your tubes are now more flattened, painting them has become easier. Apply paint to one side and leave to dry. Unfold and paint the other side.

Magic! And if the magic doesn’t happen, cover them with another layer of paint.

Let's move on to a master class on weaving a basket from newspaper tubes

If this is your first time encountering basket weaving from newspaper tubes, no problem! The process of weaving such a basket is very simple and suitable for anyone. You can also try to weave such a basket with your children, they will definitely be delighted!

Baskets from newspaper tubes can be made in various shapes, sizes, re-purposes, it all depends on your imagination! Such baskets can even be used to store toys, linen, cosmetics and various even large small items.

Let's look at how to weave a round basket from tubes 30 cm high, 15 cm in radius.

Preparation process:

1. Make approximately 75 - 85 tubes.
2. Extend the tubes so that one tube is doubled (that is, it consists of two).

Making the bottom of the basket:

1. Place the tubes so that they form a cross.
2. Place one tube on the vertical and horizontal sides so that they resemble a lattice.
3. Add interlaced tubes so that they are either below the previous one or on top. You can weave two at a time, it’s all at your discretion.
4. Stop yourself at the moment when there are 5 tubes vertically and 4 tubes horizontally.
5. Take the tube, which is the fifth one, bend it right next to the fourth horizontal one, and thread it under the third horizontal one.
6. She needs to weave a lattice around her so that this tube either goes under or over the other tubes.
7. When it runs out, extend it with glue and continue braiding.
8. Try to make sure that the lying tubes form rays with equal angles between each other.
9. When you reach the desired diameter, place the shape you will braid on the resulting bottom.
10. The bottom is done!

You should end up with a bottom of the basket similar to the one in the photo.

We braid the basket:

1. We lift the ray tubes and secure them with an elastic band or clothespins.
2. Take the tubes and start weaving either under the ray tube or above it. The braiding technology is visible in the photo.
3. Continue weaving to the desired height.
4. At about half this height, remove the elastic from the top; it is no longer needed.
5. Remove the braided form.
6. Bend the remaining protruding tubes. You can thread them into a woven basket or make a beautiful edge of the basket.

Finishing the basket:

1. Thread two tubes into the top of the basket and bend them in half.
2. Weave them into a braid. This will be the handle for the basket.
3. Insert the ends of the braid between the rods and glue them.
4. Cut off any excess tubes.
5. You can decorate the basket.
6. Now is the time to start painting the basket if you didn't paint the straws initially.
7. You can coat the resulting basket with varnish!

Video on the topic of the article

Below you can watch a video that describes in detail how to make tubes from newspapers and weave a basket from these tubes.

Wicker baskets made from newspaper tubes can be a home decoration and an excellent gift. Happy weaving! Don't stop there.

Hello, friends and guests of my blog.

In this article we will talk about the main material in weaving from newspapers - paper tubes. It is important not only to wind them correctly, but to make them convenient and comfortable to weave, to make them more pliable and plastic for this purpose.

There are plenty of options on the Internet on how to make them obedient for weaving!

I have tried 2 methods in my practice.

First method: Moisten newspaper tubes with water and hair balm (in the following proportions: for 1 liter of warm water, 1 tablespoon of hair balm (you can use any balm for these purposes, sometimes you use hair rinse, which also gives the same effect). Moisturize tubes before weaving with this solution from a spray bottle, and put them in a bag with the ends facing out (the ends of the tubes must be dry for their extension to be comfortable). I left them in the bag for literally 30 minutes, they were soaked in this solution, and then I started to weave them in. The tubes turned out to be smooth, pliable, did not give creases or cracks, but there were also disadvantages: the twist did not stick together (it bristled a little during weaving), and also, with prolonged manipulations with the tube, they began to fray. For example, when weaving small parts of the product (ears , legs) this was very noticeable, and such tubes quickly became unusable.

Yes, instead of balm or rinse aid, you can add vinegar to the solution (I tried it, the result is the same). But some people may not like this method because the vinegar smells. Although, after moistening the tubes, they do not smell like vinegar.

The second method involves more serious processing of paper (or newspaper) tubes - this is treatment with varnish or impregnation. Many weaving masters process tubes this way. And I also decided to try this method. True, I adjusted the proportions to suit myself. So, I take impregnation (I have a German-made colorless Dufa) and water in the proportions of 1 part impregnation and 1.1 parts water. I mix everything and distribute this mixture into the tubes with a brush (I show this process in great detail in the video). Then I let the tubes dry a little naturally, about 10 minutes, then put them in a plastic bag for an hour. Then I dry the tubes again at room temperature and put them back into the bag and into the freezer for two hours. Then I take out the tubes and let them sit for a couple of hours (without removing them from the bag). And I begin to weave. How do you know when the tubes are ready? They are not cold to the touch, but slightly cool, covered as if with a film, the twist on the tube does not protrude, the tube does not get wrinkled.

All the manipulations do not take much time; if you are in a hurry, you can skip the freezer step and dry the tubes a little with a hairdryer.

All this is achieved with experience and practice. Don’t be afraid to experiment, and you will definitely find the best options for yourself! Easy weaving and inspiration!